[PATCH 00/16] Add support for the Axis ARTPEC-8 SoC

[Linus Walleij]

Hi Hakyeong,

thanks for your patch!

On Thu, Jul 10, 2025 at 2:20 AM <ksk4725 at coasia.com> wrote:

> Add basic support for the Axis ARTPEC-8 SoC.
> This SoC contains four Cortex-A53 CPUs and other several IPs.
>
> Patches 1 to 10 provide the support for the clock controller,
> which is similar to other Samsung SoCs.
>
> The remaining patches provide pinctrl support and
> initial device tree support.
>
> Hakyeong Kim (9):
>   dt-bindings: clock: Add ARTPEC-8 CMU bindings
>   clk: samsung: Add clock PLL support for ARTPEC-8 SoC
>   clk: samsung: artpec-8: Add initial clock support
>   clk: samsung: artpec-8: Add clock support for CMU_CMU block
>   clk: samsung: artpec-8: Add clock support for CMU_BUS block
>   clk: samsung: artpec-8: Add clock support for CMU_CORE block
>   clk: samsung: artpec-8: Add clock support for CMU_CPUCL block
>   clk: samsung: artpec-8: Add clock support for CMU_FSYS block
>   clk: samsung: artpec-8: Add clock support for CMU_PERI block

Out of the 9 patches there are 7 patches related to "CMU" without
any explanation or even expansion of this acronym.

Camera Management Unit? I think I'm not supposed to
guess. Is is an Axis-custom piece of hardware? (Would make
sense.)

Please expand this acronym and state clearly that (if this
is a correct assumption) that you are not supplying any
bindings and even less a driver for the "CMU" thing, just the
clocks. (That's fine the actual CMU can come later, but
it should be clear *what* it is.)

Yours,
Linus Walleij