[PATCH 10/13] clk: imx: pllv2: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney at redhat.com>
---
 drivers/clk/imx/clk-pllv2.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/imx/clk-pllv2.c b/drivers/clk/imx/clk-pllv2.c
index ff17f0664faad23d826d384fa8f972e21ebd7da7..bb497ad5e0ae3df923e8f01eb2b8af710f8f8f29 100644
--- a/drivers/clk/imx/clk-pllv2.c
+++ b/drivers/clk/imx/clk-pllv2.c
@@ -178,18 +178,25 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
-		unsigned long *prate)
+static int clk_pllv2_determine_rate(struct clk_hw *hw,
+				    struct clk_rate_request *req)
 {
 	u32 dp_op, dp_mfd, dp_mfn;
 	int ret;
 
-	ret = __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
-	if (ret)
-		return ret;
+	ret = __clk_pllv2_set_rate(req->rate, req->best_parent_rate, &dp_op,
+				   &dp_mfd, &dp_mfn);
+	if (ret) {
+		req->rate = ret;
 
-	return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
-			dp_op, dp_mfd, dp_mfn);
+		return 0;
+	}
+
+	req->rate = __clk_pllv2_recalc_rate(req->best_parent_rate,
+					    MXC_PLL_DP_CTL_DPDCK0_2_EN, dp_op,
+					    dp_mfd, dp_mfn);
+
+	return 0;
 }
 
 static int clk_pllv2_prepare(struct clk_hw *hw)
@@ -235,7 +242,7 @@ static const struct clk_ops clk_pllv2_ops = {
 	.prepare = clk_pllv2_prepare,
 	.unprepare = clk_pllv2_unprepare,
 	.recalc_rate = clk_pllv2_recalc_rate,
-	.round_rate = clk_pllv2_round_rate,
+	.determine_rate = clk_pllv2_determine_rate,
 	.set_rate = clk_pllv2_set_rate,
 };
 

-- 
2.50.0