[PATCH 00/13] clk: imx: convert from clk round_rate() to determine_rate()
Brian Masney
bmasney at redhat.com
Thu Jul 10 14:10:32 PDT 2025
The round_rate() clk ops is deprecated in the clk framework in favor
of the determine_rate() clk ops. The first two patches in this series
drops the round_rate() function since a determine_rate() function is
already implemented. The remaining patches convert the drivers using
the Coccinelle semantic patch posted below. I did a few minor cosmetic
cleanups of the code in a few cases.
Coccinelle semantic patch:
virtual patch
// Look up the current name of the round_rate function
@ has_round_rate @
identifier round_rate_name =~ ".*_round_rate";
identifier hw_param, rate_param, parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
...
}
// Rename the route_rate function name to determine_rate()
@ script:python generate_name depends on has_round_rate @
round_rate_name << has_round_rate.round_rate_name;
new_name;
@@
coccinelle.new_name = round_rate_name.replace("_round_rate", "_determine_rate")
// Change rate to req->rate; also change occurrences of 'return XXX'.
@ chg_rate depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
identifier ERR =~ "E.*";
expression E;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
(
-return -ERR;
+return -ERR;
|
- return rate_param;
+ return 0;
|
- return E;
+ req->rate = E;
+
+ return 0;
|
- rate_param
+ req->rate
)
...>
}
// Coccinelle only transforms the first occurrence of the rate parameter
// Run a second time. FIXME: Is there a better way to do this?
@ chg_rate2 depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
- rate_param
+ req->rate
...>
}
// Change parent_rate to req->best_parent_rate
@ chg_parent_rate depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
(
- *parent_rate_param
+ req->best_parent_rate
|
- parent_rate_param
+ &req->best_parent_rate
)
...>
}
// Convert the function definition from round_rate() to determine_rate()
@ func_definition depends on chg_rate @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
identifier generate_name.new_name;
@@
- long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
- unsigned long *parent_rate_param)
+ int new_name(struct clk_hw *hw, struct clk_rate_request *req)
{
...
}
// Update the ops from round_rate() to determine_rate()
@ ops depends on func_definition @
identifier has_round_rate.round_rate_name;
identifier generate_name.new_name;
@@
{
...,
- .round_rate = round_rate_name,
+ .determine_rate = new_name,
...,
}
Note that I used coccinelle 1.2 instead of 1.3 since the newer version
adds unnecessary braces as described in this post.
https://lore.kernel.org/cocci/67642477-5f3e-4b2a-914d-579a54f48cbd@intel.com/
Signed-off-by: Brian Masney <bmasney at redhat.com>
---
Brian Masney (13):
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: scu: convert from round_rate() to determine_rate()
drivers/clk/imx/clk-busy.c | 8 ++---
drivers/clk/imx/clk-composite-8m.c | 16 ---------
drivers/clk/imx/clk-composite-93.c | 7 ----
drivers/clk/imx/clk-cpu.c | 10 +++---
drivers/clk/imx/clk-fixup-div.c | 8 ++---
drivers/clk/imx/clk-frac-pll.c | 20 ++++++-----
drivers/clk/imx/clk-fracn-gppll.c | 17 +++++----
drivers/clk/imx/clk-pfd.c | 18 +++++-----
drivers/clk/imx/clk-pll14xx.c | 29 +++++++++------
drivers/clk/imx/clk-pllv2.c | 23 +++++++-----
drivers/clk/imx/clk-pllv3.c | 72 +++++++++++++++++++++-----------------
drivers/clk/imx/clk-pllv4.c | 29 +++++++++------
drivers/clk/imx/clk-scu.c | 36 +++++--------------
13 files changed, 146 insertions(+), 147 deletions(-)
---
base-commit: b551c4e2a98a177a06148cf16505643cd2108386
change-id: 20250710-clk-imx-round-rate-b9fca1f65834
Best regards,
--
Brian Masney <bmasney at redhat.com>
More information about the linux-arm-kernel
mailing list