[PATCH 06/72] ARM: dts: nxp: imx6qdl-wandboard: Replace clock-frequency in camera sensor node

[Laurent Pinchart]

The clock-frequency for camera sensors has been deprecated in favour of
the assigned-clocks and assigned-clock-rates properties. Replace it in
the device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi
index 26489eccd5fb..e5ac78ffb31c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi
@@ -136,8 +136,11 @@ camera at 3c {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ov5645>;
 		reg = <0x3c>;
+
 		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-frequency = <24000000>;
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO2>;
+		assigned-clock-rates = <24000000>;
+
 		vdddo-supply = <&reg_1p8v>;
 		vdda-supply = <&reg_2p8v>;
 		vddd-supply = <&reg_1p5v>;
-- 
Regards,

Laurent Pinchart