[PATCH 04/16] clk: samsung: artpec-8: Add initial clock support

Krzysztof Kozlowski krzk at kernel.org
Thu Jul 10 00:12:40 PDT 2025


On 10/07/2025 02:20, ksk4725 at coasia.com wrote:
> From: Hakyeong Kim <hgkim05 at coasia.com>
> 
> Add initial clock support for ARTPEC-8 SoC which is required
> for enabling basic clock management.
> 
> Add clock support for below CMU block in ARTPEC-8 SoC:
>  - CMU_IMEM
> 
> Signed-off-by: Ravi Patel <ravi.patel at samsung.com>
> Signed-off-by: Hakyeong Kim <hgkim05 at coasia.com>
> ---
>  drivers/clk/samsung/Kconfig       |  8 ++++
>  drivers/clk/samsung/Makefile      |  1 +
>  drivers/clk/samsung/clk-artpec8.c | 62 +++++++++++++++++++++++++++++++
>  3 files changed, 71 insertions(+)
>  create mode 100644 drivers/clk/samsung/clk-artpec8.c
> 
> diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig
> index 76a494e95027..289591b403ad 100644
> --- a/drivers/clk/samsung/Kconfig
> +++ b/drivers/clk/samsung/Kconfig
> @@ -13,6 +13,7 @@ config COMMON_CLK_SAMSUNG
>  	select EXYNOS_5420_COMMON_CLK if ARM && SOC_EXYNOS5420
>  	select EXYNOS_ARM64_COMMON_CLK if ARM64 && ARCH_EXYNOS
>  	select TESLA_FSD_COMMON_CLK if ARM64 && ARCH_TESLA_FSD
> +	select ARTPEC8_COMMON_CLK if ARM64 && ARCH_ARTPEC8

Here and:

>  
>  config S3C64XX_COMMON_CLK
>  	bool "Samsung S3C64xx clock controller support" if COMPILE_TEST
> @@ -102,3 +103,10 @@ config TESLA_FSD_COMMON_CLK
>  	help
>  	  Support for the clock controller present on the Tesla FSD SoC.
>  	  Choose Y here only if you build for this SoC.
> +
> +config ARTPEC8_COMMON_CLK

here, place it before EXYNOS_3250_COMMON_CLK.

> +	bool "Axis ARTPEC-8 clock controller support" if COMPILE_TEST
> +	depends on COMMON_CLK_SAMSUNG
> +	help



Best regards,
Krzysztof



More information about the linux-arm-kernel mailing list