[PATCH v3 00/24] pmdomain: Add generic ->sync_state() support to genpd

[Ulf Hansson]

On Tue, 1 Jul 2025 at 13:47, Ulf Hansson <ulf.hansson at linaro.org> wrote:
>
> Changes in v3:
>         - Added a couple of patches to adress problems on some Renesas
>         platforms. Thanks Geert and Tomi for helping out!
>         - Adressed a few comments from Saravanna and Konrad.
>         - Added some tested-by tags.

I decided it was time to give this a try, so I have queued this up for
v6.17 via the next branch at my pmdomain tree.

If you encounter any issues, please let me know so I can help to fix them.

Kind regards
Uffe


>
> Changes in v2:
>         - Well, quite a lot as I discovered various problems when doing
>         additional testing of corner-case. I suggest re-review from scratch,
>         even if I decided to keep some reviewed-by tags.
>         - Added patches to allow some drivers that needs to align or opt-out
>         from the new common behaviour in genpd.
>
> If a PM domain (genpd) is powered-on during boot, there is probably a good
> reason for it. Therefore it's known to be a bad idea to allow such genpd to be
> powered-off before all of its consumer devices have been probed. This series
> intends to fix this problem.
>
> We have been discussing these issues at LKML and at various Linux-conferences
> in the past. I have therefore tried to include the people I can recall being
> involved, but I may have forgotten some (my apologies), feel free to loop them
> in.
>
> I have tested this with QEMU with a bunch of local test-drivers and DT nodes.
> Let me know if you want me to share this code too.
>
> Please help review and test!
> Finally, a big thanks to Saravana for all the support!
>
> Kind regards
> Ulf Hansson
>
>
> Saravana Kannan (1):
>   driver core: Add dev_set_drv_sync_state()
>
> Ulf Hansson (23):
>   pmdomain: renesas: rcar-sysc: Add genpd OF provider at
>     postcore_initcall
>   pmdomain: renesas: rmobile-sysc: Move init to postcore_initcall
>   pmdomain: renesas: rcar-gen4-sysc: Move init to postcore_initcall
>   pmdomain: core: Prevent registering devices before the bus
>   pmdomain: core: Add a bus and a driver for genpd providers
>   pmdomain: core: Add the genpd->dev to the genpd provider bus
>   pmdomain: core: Export a common ->sync_state() helper for genpd
>     providers
>   pmdomain: core: Prepare to add the common ->sync_state() support
>   soc/tegra: pmc: Opt-out from genpd's common ->sync_state() support
>   cpuidle: psci: Opt-out from genpd's common ->sync_state() support
>   cpuidle: riscv-sbi: Opt-out from genpd's common ->sync_state() support
>   pmdomain: qcom: rpmpd: Use of_genpd_sync_state()
>   pmdomain: qcom: rpmhpd: Use of_genpd_sync_state()
>   firmware/pmdomain: xilinx: Move ->sync_state() support to firmware
>     driver
>   firmware: xilinx: Don't share zynqmp_pm_init_finalize()
>   firmware: xilinx: Use of_genpd_sync_state()
>   driver core: Export get_dev_from_fwnode()
>   pmdomain: core: Add common ->sync_state() support for genpd providers
>   pmdomain: core: Default to use of_genpd_sync_state() for genpd
>     providers
>   pmdomain: core: Leave powered-on genpds on until late_initcall_sync
>   pmdomain: core: Leave powered-on genpds on until sync_state
>   cpuidle: psci: Drop redundant sync_state support
>   cpuidle: riscv-sbi: Drop redundant sync_state support
>
>  drivers/base/core.c                         |   8 +-
>  drivers/cpuidle/cpuidle-psci-domain.c       |  14 --
>  drivers/cpuidle/cpuidle-riscv-sbi.c         |  14 --
>  drivers/firmware/xilinx/zynqmp.c            |  18 +-
>  drivers/pmdomain/core.c                     | 211 ++++++++++++++++++--
>  drivers/pmdomain/qcom/rpmhpd.c              |   2 +
>  drivers/pmdomain/qcom/rpmpd.c               |   2 +
>  drivers/pmdomain/renesas/rcar-gen4-sysc.c   |   2 +-
>  drivers/pmdomain/renesas/rcar-sysc.c        |  19 +-
>  drivers/pmdomain/renesas/rmobile-sysc.c     |   3 +-
>  drivers/pmdomain/xilinx/zynqmp-pm-domains.c |  16 --
>  drivers/soc/tegra/pmc.c                     |  26 ++-
>  include/linux/device.h                      |  13 ++
>  include/linux/firmware/xlnx-zynqmp.h        |   6 -
>  include/linux/pm_domain.h                   |  17 ++
>  15 files changed, 291 insertions(+), 80 deletions(-)
>
> --
> 2.43.0
>