[PATCH v2 2/8] dt-bindings: thermal: sun8i: Add A523 THS0/1 controllers

Rob Herring robh at kernel.org
Tue Jul 8 14:31:05 PDT 2025


On Thu, Jul 03, 2025 at 11:11:26PM +0800, iuncuim wrote:
> From: Mikhail Kalashnikov <iuncuim at gmail.com>
> 
> Add a binding for D1/T113s thermal sensor controller. Add dt-bindings
> description of the thermal sensors in the A523 processor.
> The controllers require activation of the additional frequency of the
> associated gpadc controller, so a new clock property has been added.
> 
> The calibration data is split into two cells that are in different areas
> of nvmem. Both controllers require access to both memory cell, so a new
> property nvmem-cells has been added. To maintain backward compatibility,
> the name of the old cell remains the same and the new nvmem-cell-names is
> called calibration-second-part
> 
> Signed-off-by: Mikhail Kalashnikov <iuncuim at gmail.com>
> ---
>  .../thermal/allwinner,sun8i-a83t-ths.yaml     | 49 +++++++++++++++++--
>  1 file changed, 46 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
> index 3e61689f6..80657435a 100644
> --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
> +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
> @@ -24,18 +24,22 @@ properties:
>        - allwinner,sun50i-h5-ths
>        - allwinner,sun50i-h6-ths
>        - allwinner,sun50i-h616-ths
> +      - allwinner,sun55i-a523-ths0
> +      - allwinner,sun55i-a523-ths1
>  
>    clocks:
>      minItems: 1
>      items:
>        - description: Bus Clock
>        - description: Module Clock
> +      - description: GPADC Clock

You add a 3rd clock for everyone, but I don't see a conditional schema 
keeping the existing users at 2 clocks (maxItems: 2).

>  
>    clock-names:
>      minItems: 1
>      items:
>        - const: bus
>        - const: mod
> +      - const: gpadc
>  
>    reg:
>      maxItems: 1
> @@ -47,11 +51,16 @@ properties:
>      maxItems: 1
>  
>    nvmem-cells:
> -    maxItems: 1
> -    description: Calibration data for thermal sensors
> +    minItems: 1
> +    items:
> +      - description: Calibration data for thermal sensors
> +      - description: Additional cell in case of separate calibration data
>  
>    nvmem-cell-names:
> -    const: calibration
> +    minItems: 1
> +    items:
> +      - const: calibration
> +      - const: calibration-second-part
>  
>    allwinner,sram:
>      maxItems: 1
> @@ -107,6 +116,7 @@ allOf:
>              enum:
>                - allwinner,sun8i-h3-ths
>                - allwinner,sun20i-d1-ths
> +              - allwinner,sun55i-a523-ths0
>  
>      then:
>        properties:
> @@ -132,6 +142,26 @@ allOf:
>          - clock-names
>          - resets
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - allwinner,sun55i-a523-ths0
> +              - allwinner,sun55i-a523-ths1
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 2
> +        clock-names:
> +          items:
> +            - const: bus
> +            - const: gpadc

But if there's really still just 2 clocks, you need the last entry to be 
'enum: [ mod, gpadc ]'

Though really, how can this h/w now not have a clock for itself? 


> +        nvmem-cells:
> +          minItems: 2
> +        nvmem-cell-names:
> +          minItems: 2

Everyone else needs 'maxItems: 1'

> +
>  required:
>    - compatible
>    - reg
> @@ -176,4 +206,17 @@ examples:
>          #thermal-sensor-cells = <1>;
>      };
>  
> +  - |
> +    thermal-sensor at 2009400 {
> +      compatible = "allwinner,sun55i-a523-ths1";
> +      reg = <0x02009400 0x400>;
> +      interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_GPADC1>;
> +      clock-names = "bus", "gpadc";
> +      resets = <&ccu RST_BUS_THS>;
> +      nvmem-cells = <&ths_calibration0>, <&ths_calibration1>;
> +      nvmem-cell-names = "calibration",
> +             "calibration-second-part";
> +      #thermal-sensor-cells = <1>;
> +    };
>  ...
> -- 
> 2.49.0
> 



More information about the linux-arm-kernel mailing list