[PATCH] arm64: dts: lx2160a-qds: add the two on-board RGMII PHYs

[Frank Li]

On Mon, Jul 07, 2025 at 06:33:31PM +0300, Ioana Ciornei wrote:
> Describe the two LX2160AQDS on-board RGMII PHYs on their respective MDIO
> buses behind the MDIO multiplexer.
>
> Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li at nxp.com>

>  .../boot/dts/freescale/fsl-lx2160a-qds.dts    | 20 +++++++++++++++++++
>  1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> index 4d721197d837..2d01e20b47e7 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> @@ -43,12 +43,22 @@ mdio at 0 { /* On-board PHY #1 RGMI1*/
>  			reg = <0x00>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> +
> +			rgmii_phy1: ethernet-phy at 1 {
> +				compatible = "ethernet-phy-id001c.c916";
> +				reg = <0x1>;
> +			};
>  		};
>
>  		mdio at 8 { /* On-board PHY #2 RGMI2*/
>  			reg = <0x8>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> +
> +			rgmii_phy2: ethernet-phy at 2 {
> +				compatible = "ethernet-phy-id001c.c916";
> +				reg = <0x2>;
> +			};
>  		};
>
>  		mdio at 18 { /* Slot #1 */
> @@ -169,6 +179,16 @@ &crypto {
>  	status = "okay";
>  };
>
> +&dpmac17 {
> +	phy-handle = <&rgmii_phy1>;
> +	phy-connection-type = "rgmii-id";
> +};
> +
> +&dpmac18 {
> +	phy-handle = <&rgmii_phy2>;
> +	phy-connection-type = "rgmii-id";
> +};
> +
>  &dspi0 {
>  	status = "okay";
>
> --
> 2.25.1
>