[PATCH v1 0/2] arm64: dts: freescale: imx8mp-toradex-smarc: remove gpio-hog on lvds_dsi_sel

[max.oss.09 at gmail.com]

From: Max Krummenacher <max.krummenacher at toradex.com>

The LVDS_DSI_SEL does not leave the SoM, so do its pinmuxing on the SoM dtsi and don't
leave that to a carrier board dts file.

Using a pull down on the LVDS_DSI_SEL signal is enough to have the signal not floating
and have the SoM in a defined state.
Thus remove the gpio-hog used on the line and leave this to carrier board dts files or
overlays to use the signal as needed.


Max Krummenacher (2):
  arm64: dts: freescale: imx8mp-toradex-smarc: fix lvds dsi mux gpio
  arm64: dts: freescale: imx8mp-toradex-smarc: remove gpio hog

 .../boot/dts/freescale/imx8mp-toradex-smarc-dev.dts    |  5 -----
 .../arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi | 10 ++--------
 2 files changed, 2 insertions(+), 13 deletions(-)

-- 
2.42.0