[PATCH 5/7] arm64: dts: imx8mn-venice-gw7902: Increase HS400 USDHC clock speed
Tim Harvey
tharvey at gateworks.com
Mon Jul 7 13:17:00 PDT 2025
The IMX8M reference manuals indicate in the USDHC Clock generator section
that the clock rate for DDR is 1/2 the input clock therefore HS400 rates
clocked at 200Mhz require a 400Mhz SDHC clock.
This showed about a 1.5x improvement in read performance for the eMMC's
used on the various imx8m{m,n,p}-venice boards.
Fixes: ef484dfcf6f7 ("arm64: dts: imx: Add i.mx8mm/imx8mn Gateworks gw7902 dts support")
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index 30c286b34aa5..a5f52f60169e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -693,6 +693,8 @@ &usdhc3 {
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clk IMX8MN_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
bus-width = <8>;
non-removable;
status = "okay";
--
2.25.1
More information about the linux-arm-kernel
mailing list