[PATCH 1/5] pinctrl: sunxi: Fix a100 emac pin function name
Chen-Yu Tsai
wens at csie.org
Mon Jul 7 02:52:07 PDT 2025
On Mon, Jul 7, 2025 at 5:39 PM Paul Kocialkowski <paulk at sys-base.io> wrote:
>
> Hi Chen-Yu,
>
> Le Sun 06 Jul 25, 23:04, Chen-Yu Tsai a écrit :
> > On Sun, Jul 6, 2025 at 8:00 AM Paul Kocialkowski <paulk at sys-base.io> wrote:
> > >
> > > Hi Andre,
> > >
> > > Le Sat 05 Jul 25, 15:38, Andre Przywara a écrit :
> > > > On Fri, 4 Jul 2025 23:35:35 +0100
> > > > Andre Przywara <andre.przywara at arm.com> wrote:
> > > >
> > > > Hi,
> > > >
> > > > > On Thu, 26 Jun 2025 10:09:19 +0200
> > > > > Paul Kocialkowski <paulk at sys-base.io> wrote:
> > > > >
> > > > > Hi Paul,
> > > > >
> > > > > > The Allwinner A100/A133 only has a single emac instance, which is
> > > > > > referred to as "emac" everywhere. Fix the pin names to drop the
> > > > > > trailing "0" that has no reason to be.
> > > > >
> > > > > Sorry, but this is wrong. There *is* a second EMAC on the A133 die: it's
> > > > > indeed not mentioned in the manual, but you can probe its MMIO
> > > > > registers (@0x5030000), and there is a second syscon register
> > > > > (@0x03000034). It's mentioned in several BSP code places ([1]).
> > > > > It seem like no suitable pins are connected on the A133
> > > > > package, but that should not affect the A100 .dtsi (we use a similar
> > > > > approach for the H616 and A523).
> > > > >
> > > > > So I think we should keep the emac0 name.
> > > >
> > > > just thinking that it's even worse: this changes the DT visible pinctrl
> > > > function name, so it's a DT ABI change. With the "emac0" function name,
> > > > Ethernet would work with stable kernels already (as everything is
> > > > compatible, it's just about DT changes). But with this change, pinctrl
> > > > drivers in older kernels would not match.
> > >
> > > Given that the port is still very early and experimental and has very few users
> > > and no field deployment so I don't really think it would have annoyed anybody in
> > > practice. But yes in principle you are right, while the header renames keep the
> > > same value, the string names are used to match the device-tree definitions and
> > > this constitues ABI that needs to remain stable.
> > >
> > > > So I would very much like to see this patch moved out. Is it just in
> > > > LinusW's tree so far? I don't see it in -next yet.
> > >
> > > I don't think the patches were accepted for over a week so we can probably
> > > still act. I will send reverts, unless maintainers want to manually remove
> > > these commits?
> >
> > I can drop the dts patches from the sunxi tree. Linus might be able to
> > drop the pinctrl patch.
> >
> > You definitely need to send a revert for the DT binding patch that is
> > already in net-next.
>
> Should this really affect the bindings though?
>
> From what Andre reported, both EMAC0 and EMAC1 should be the same block so it
> doesn't seem particularly necessary to have a different compatible.
>
> Looking at Allwiner's BSP code for the A133[0], I don't see any difference
> between the two. While there's device_type property in Allwinner's dt, it's
> apparently not used by the driver[1].
>
> So I think we're still fine with a single compatible (without the controller
> index in it).
The block is the same, but the integration is slightly different, as
the register for the RGMII clock delays and other stuff is at a different
offset in the system controller. The BSP handles this by directly
including the register in the "reg" property.
So yes, you do need a separate compatible string, if only to deal with
the slight difference in the integration layer.
ChenYu
> [0]: https://github.com/engSinteck/A133_Image/blob/main/longan/kernel/linux-4.9/arch/arm64/boot/dts/sunxi/sun50iw10p1.dtsi#L2016
> [1]: https://github.com/engSinteck/A133_Image/blob/main/longan/kernel/linux-4.9/drivers/net/ethernet/allwinner/sunxi-gmac.c
>
> All the best,
>
> Paul
>
> >
> > ChenYu
> >
> >
> > > Cheers,
> > >
> > > Paul
> > >
> > > > Cheers,
> > > > Andre.
> > > >
> > > > > [1]
> > > > > https://github.com/qiaoweibiao/T507_Kernel/blob/main/arch/arm64/boot/dts/sunxi/sun50iw10p1.dtsi
> > > > >
> > > > >
> > > > > >
> > > > > > Fixes: 473436e7647d ("pinctrl: sunxi: add support for the Allwinner A100 pin controller")
> > > > > > Signed-off-by: Paul Kocialkowski <paulk at sys-base.io>
> > > > > > ---
> > > > > > drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c | 32 ++++++++++-----------
> > > > > > 1 file changed, 16 insertions(+), 16 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c
> > > > > > index b97de80ae2f3..95b764ee1c0d 100644
> > > > > > --- a/drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c
> > > > > > +++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c
> > > > > > @@ -546,33 +546,33 @@ static const struct sunxi_desc_pin a100_pins[] = {
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > SUNXI_FUNCTION(0x1, "gpio_out"),
> > > > > > SUNXI_FUNCTION(0x2, "i2c0"), /* SCK */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* RXD1 */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* RXD1 */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 0)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 1),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > SUNXI_FUNCTION(0x1, "gpio_out"),
> > > > > > SUNXI_FUNCTION(0x2, "i2c0"), /* SDA */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* RXD0 */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* RXD0 */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 1)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 2),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > SUNXI_FUNCTION(0x1, "gpio_out"),
> > > > > > SUNXI_FUNCTION(0x2, "i2c1"), /* SCK */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* RXCTL */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* RXCTL */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 2)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 3),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > SUNXI_FUNCTION(0x1, "gpio_out"),
> > > > > > SUNXI_FUNCTION(0x2, "i2c1"), /* SDA */
> > > > > > SUNXI_FUNCTION(0x3, "cir0"), /* OUT */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* CLKIN */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* CLKIN */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 3)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 4),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > SUNXI_FUNCTION(0x1, "gpio_out"),
> > > > > > SUNXI_FUNCTION(0x2, "uart3"), /* TX */
> > > > > > SUNXI_FUNCTION(0x3, "spi1"), /* CS */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* TXD1 */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* TXD1 */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 4)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 5),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > @@ -580,14 +580,14 @@ static const struct sunxi_desc_pin a100_pins[] = {
> > > > > > SUNXI_FUNCTION(0x2, "uart3"), /* RX */
> > > > > > SUNXI_FUNCTION(0x3, "spi1"), /* CLK */
> > > > > > SUNXI_FUNCTION(0x4, "ledc"),
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* TXD0 */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* TXD0 */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 5)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 6),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > SUNXI_FUNCTION(0x1, "gpio_out"),
> > > > > > SUNXI_FUNCTION(0x2, "uart3"), /* RTS */
> > > > > > SUNXI_FUNCTION(0x3, "spi1"), /* MOSI */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* TXCK */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* TXCK */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 6)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 7),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > @@ -595,7 +595,7 @@ static const struct sunxi_desc_pin a100_pins[] = {
> > > > > > SUNXI_FUNCTION(0x2, "uart3"), /* CTS */
> > > > > > SUNXI_FUNCTION(0x3, "spi1"), /* MISO */
> > > > > > SUNXI_FUNCTION(0x4, "spdif"), /* OUT */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* TXCTL */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* TXCTL */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 7)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 8),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > @@ -611,7 +611,7 @@ static const struct sunxi_desc_pin a100_pins[] = {
> > > > > > SUNXI_FUNCTION(0x2, "dmic"), /* DATA0 */
> > > > > > SUNXI_FUNCTION(0x3, "spi2"), /* CLK */
> > > > > > SUNXI_FUNCTION(0x4, "i2s2"), /* BCLK */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* MDC */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* MDC */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 9)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 10),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > @@ -619,7 +619,7 @@ static const struct sunxi_desc_pin a100_pins[] = {
> > > > > > SUNXI_FUNCTION(0x2, "dmic"), /* DATA1 */
> > > > > > SUNXI_FUNCTION(0x3, "spi2"), /* MOSI */
> > > > > > SUNXI_FUNCTION(0x4, "i2s2"), /* LRCK */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* MDIO */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* MDIO */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 10)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 11),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > @@ -642,33 +642,33 @@ static const struct sunxi_desc_pin a100_pins[] = {
> > > > > > SUNXI_FUNCTION(0x1, "gpio_out"),
> > > > > > SUNXI_FUNCTION(0x3, "i2c3"), /* SCK */
> > > > > > SUNXI_FUNCTION(0x4, "i2s3"), /* MCLK */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* EPHY */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* EPHY */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 13)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 14),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > SUNXI_FUNCTION(0x1, "gpio_out"),
> > > > > > SUNXI_FUNCTION(0x4, "i2s3"), /* BCLK */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* RXD3 */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* RXD3 */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 14)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 15),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > SUNXI_FUNCTION(0x1, "gpio_out"),
> > > > > > SUNXI_FUNCTION(0x4, "i2s3"), /* LRCK */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* RXD2 */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* RXD2 */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 15)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 16),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > SUNXI_FUNCTION(0x1, "gpio_out"),
> > > > > > SUNXI_FUNCTION(0x3, "i2s3_dout0"), /* DOUT0 */
> > > > > > SUNXI_FUNCTION(0x4, "i2s3_din1"), /* DIN1 */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* RXCK */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* RXCK */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 16)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 17),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > SUNXI_FUNCTION(0x1, "gpio_out"),
> > > > > > SUNXI_FUNCTION(0x3, "i2s3_dout1"), /* DOUT1 */
> > > > > > SUNXI_FUNCTION(0x4, "i2s3_din0"), /* DIN0 */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* TXD3 */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* TXD3 */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 17)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 18),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > > > @@ -676,7 +676,7 @@ static const struct sunxi_desc_pin a100_pins[] = {
> > > > > > SUNXI_FUNCTION(0x2, "cir0"), /* OUT */
> > > > > > SUNXI_FUNCTION(0x3, "i2s3_dout2"), /* DOUT2 */
> > > > > > SUNXI_FUNCTION(0x4, "i2s3_din2"), /* DIN2 */
> > > > > > - SUNXI_FUNCTION(0x5, "emac0"), /* TXD2 */
> > > > > > + SUNXI_FUNCTION(0x5, "emac"), /* TXD2 */
> > > > > > SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 18)),
> > > > > > SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 19),
> > > > > > SUNXI_FUNCTION(0x0, "gpio_in"),
> > > > >
> > > > >
> > > >
> > >
> > > --
> > > Paul Kocialkowski,
> > >
> > > Independent contractor - sys-base - https://www.sys-base.io/
> > > Free software developer - https://www.paulk.fr/
> > >
> > > Expert in multimedia, graphics and embedded hardware support with Linux.
>
> --
> Paul Kocialkowski,
>
> Independent contractor - sys-base - https://www.sys-base.io/
> Free software developer - https://www.paulk.fr/
>
> Expert in multimedia, graphics and embedded hardware support with Linux.
More information about the linux-arm-kernel
mailing list