[PATCH v7 4/6] arm64: dts: imx8mp: convert 'aips5' to 'aipstz5'

[Alexander Stein]

Hi,

Am Mittwoch, 2. Juli 2025, 21:54:09 CEST schrieb Laurentiu Mihalcea:
> On 7/2/2025 9:49 PM, Mark Brown wrote:
> > On Tue, Jun 10, 2025 at 12:01:50PM -0400, Laurentiu Mihalcea wrote:
> >> From: Laurentiu Mihalcea <laurentiu.mihalcea at nxp.com>
> >>
> >> AIPS5 is actually AIPSTZ5 as it offers some security-related
> >> configurations. Since these configurations need to be applied before
> >> accessing any of the peripherals on the bus, it's better to make AIPSTZ5
> >> be their parent instead of keeping AIPS5 and adding a child node for
> >> AIPSTZ5. Also, because of the security configurations, the address space
> >> of the bus has to be changed to that of the configuration registers.
> >>
> >> Finally, since AIPSTZ5 belongs to the AUDIOMIX power domain, add the
> >> missing 'power-domains' property. The domain needs to be powered on before
> >> attempting to configure the security-related registers.
> > I'm seeing failures to probe the audio devices on the i.MX8MP Verdin
> > system in -next which seem to bisect down to this commit,  I'm seeing
> > separate boot failures on the EVK so haven't been able to confirm the
> > status there.  There's no obvious logging, the dt selftest shows:
> >
> > # not ok 141 /sound
> > # not ok 142 /sound-hdmi
> >
> > Full log at:
> >
> >   https://lava.sirena.org.uk/scheduler/job/1530197#L5119
> 
> Hi Mark,
> 
> Thanks for catching this!
> 
> After browsing through the provided logs it would seem like no device under the
> AIPSTZ bus gets probed. Right now, my guess is that the AIPSTZ driver is not being
> compiled since CONFIG_IMX_AIPSTZ might be set to 'n'.
> 
> Which defconfig is the CI using? Is it arch/arm64/configs/defconfig?

I'm also seeing audio problems starting with this commit. In my case I get
the following error:
fsl-asoc-card sound: failed to find CPU DAI device
fsl-asoc-card sound: probe with driver fsl-asoc-card failed with error -22

DAI device is sai5 aka /soc at 0/bus at 30df0000/spba-bus at 30c00000/sai at 30c50000.
It turns out that the module snd_soc_fsl_sai is not even autoloaded. Loading
manually doesn't have any effect. So I assume starting from this commit
the subnodes (at least sai5) are not even populated.
Reverting this commit fixes my setup.
I've set CONFIG_IMX_AIPSTZ to both  'y' or 'm' and doesn't change anything.

Best regards,
Alexander
-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/