[PATCH 4/5] arm64: dts: allwinner: a100: Add EMAC support
Andre Przywara
andre.przywara at arm.com
Fri Jul 4 16:32:43 PDT 2025
On Thu, 26 Jun 2025 10:09:22 +0200
Paul Kocialkowski <paulk at sys-base.io> wrote:
Hi,
> The Allwinner A100/A133 Ethernet MAC (EMAC) is compatible with the A64
> one and needs access to the syscon register for control of the
> top-level integration of the unit.
as mentioned before, this would benefit from using "emac0", to signify
that there is a second MAC, but otherwise this matches what I found in
the manual and could test, so with the 0 suffix added:
>
> Signed-off-by: Paul Kocialkowski <paulk at sys-base.io>
Reviewed-by: Andre Przywara <andre.przywara at arm.com>
Cheers,
Andre
> ---
> .../arm64/boot/dts/allwinner/sun50i-a100.dtsi | 20 +++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> index 1c4e71b32911..205faa90d37b 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> @@ -420,6 +420,26 @@ i2c3: i2c at 5002c00 {
> #size-cells = <0>;
> };
>
> + emac: ethernet at 5020000 {
> + compatible = "allwinner,sun50i-a100-emac",
> + "allwinner,sun50i-a64-emac";
> + reg = <0x5020000 0x10000>;
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq";
> + clocks = <&ccu CLK_BUS_EMAC>;
> + clock-names = "stmmaceth";
> + resets = <&ccu RST_BUS_EMAC>;
> + reset-names = "stmmaceth";
> + syscon = <&syscon>;
> + status = "disabled";
> +
> + mdio: mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> ths: thermal-sensor at 5070400 {
> compatible = "allwinner,sun50i-a100-ths";
> reg = <0x05070400 0x100>;
More information about the linux-arm-kernel
mailing list