[PATCH 1/5] ARM: dts: aspeed: Expand data0 partition in facebook-bmc-flash-layout-128.dtsi

[Tao Ren]

On Fri, Jul 04, 2025 at 09:36:29AM +0930, Andrew Jeffery wrote:
> On Tue, 2025-07-01 at 22:04 -0700, rentao.bupt at gmail.com wrote:
> > From: Tao Ren <rentao.bupt at gmail.com>
> > 
> > Expand data0 partition to 64MB in facebook-bmc-flash-layout-128.dtsi for
> > larger persistent storage.
> > 
> > Signed-off-by: Tao Ren <rentao.bupt at gmail.com>
> > ---
> >  .../boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi | 10 +++++-----
> >  1 file changed, 5 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
> > index 7f3652dea550..efd92232cda2 100644
> > --- a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
> > +++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
> > @@ -32,19 +32,19 @@ image-meta at f0000 {
> >         };
> >  
> >         /*
> > -        * FIT image: 119 MB.
> > +        * FIT image: 63 MB.
> >          */
> >         fit at 100000 {
> > -               reg = <0x100000 0x7700000>;
> > +               reg = <0x100000 0x3f00000>;
> >                 label = "fit";
> >         };
> >  
> >         /*
> > -        * "data0" partition (8MB) is used by Facebook BMC platforms as
> > +        * "data0" partition (64MB) is used by Facebook BMC platforms as
> >          * persistent data store.
> >          */
> > -       data0 at 7800000 {
> > -               reg = <0x7800000 0x800000>;
> > +       data0 at 4000000 {
> > +               reg = <0x4000000 0x4000000>;
> >                 label = "data0";
> >         };
> >  
> 
> Two existing systems use this dtsi:
> 
>    > git grep facebook-bmc-flash-layout-128.dtsi
>    arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts:#include "facebook-bmc-flash-layout-128.dtsi"
>    arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi:#include "facebook-bmc-flash-layout-128.dtsi"
> 
> This change requires a full reflash of those devices, which is pretty
> disruptive.
> 
> It seems more appropriate to me to create a separate dtsi for the new
> flash layout to use in new systems.
> 
> Andrew

Hi Andrew,

I agree it's better to create a new layout, and I will take care of it
in v2. The migration is already done for all the network BMC platforms
except elbert/darwin, and having separate layouts will make my life
easier :)

Any suggestions about the file name of the new layout?


Thanks,

Tao