[PATCH 3/3] PCI: brcmstb: Add 74110a0 SoC configuration details

[Florian Fainelli]

On 7/3/2025 2:53 PM, Jim Quinlan wrote:
> Enable PCIe for 74110a0 SoC.  This chip uses a simple mechanism
> to map inbound memory regions.  Both the "ranges" and "dma-ranges"
> are identity-mapped to PCIe space.
> 
> Signed-off-by: Jim Quinlan <james.quinlan at broadcom.com>

Reviewed-by: Florian Fainelli <florian.fainelli at broadcom.com>

> ---
>   drivers/pci/controller/pcie-brcmstb.c | 21 ++++++++++++++++++++-
>   1 file changed, 20 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index 362ac083e112..bfedab15a162 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -276,6 +276,7 @@ enum pcie_soc_base {
>   	BCM7435,
>   	BCM7712,
>   	BCM33940,
> +	BCM74110,
>   };
>   
>   /*
> @@ -291,7 +292,7 @@ enum pcie_soc_base {
>    * power of two.  Such systems may or may not have an IOMMU between the RC
>    * and memory.
>    */
> -#define IS_NG_PCI_SOC(t) (0)
> +#define IS_NG_PCI_SOC(t) ((t) == BCM74110)
>   
>   struct inbound_win {
>   	u64 size;
> @@ -2046,6 +2047,14 @@ static const int pcie_offsets_bcm7712[] = {
>   	[PCIE_INTR2_CPU_BASE]	= 0x4400,
>   };
>   
> +static const int pcie_offset_bcm74110[] = {
> +	[RGR1_SW_INIT_1] = 0xc010,
> +	[EXT_CFG_INDEX]  = 0x9000,
> +	[EXT_CFG_DATA]   = 0x8000,
> +	[PCIE_HARD_DEBUG] = 0x4204,
> +	[PCIE_INTR2_CPU_BASE] = 0x4300,
> +};
> +
>   static const int pcie_offset_bcm33940[] = {
>   	[RGR1_SW_INIT_1] = 0x9210,
>   	[EXT_CFG_INDEX] = 0x9000,
> @@ -2162,6 +2171,15 @@ static const struct pcie_cfg_data bcm33940_cfg = {
>   	.num_inbound_wins = 10,
>   };
>   
> +static const struct pcie_cfg_data bcm74110_cfg = {
> +	.offsets	= pcie_offset_bcm74110,
> +	.soc_base	= BCM74110,
> +	.perst_set	= brcm_pcie_perst_set_7278,
> +	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> +	.has_phy	= true,
> +	.has_err_report	= true,
> +};
> +
>   static const struct of_device_id brcm_pcie_match[] = {
>   	{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
>   	{ .compatible = "brcm,bcm2712-pcie", .data = &bcm2712_cfg },
> @@ -2177,6 +2195,7 @@ static const struct of_device_id brcm_pcie_match[] = {
>   	{ .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
>   	{ .compatible = "brcm,bcm7712-pcie", .data = &bcm7712_cfg },
>   	{ .compatible = "brcm,bcm33940-pcie", .data = &bcm33940_cfg },
> +	{ .compatible = "brcm,bcm74110-pcie", .data = &bcm74110_cfg },

Nit: if you need to respin, it might be nice to order numerically here?
-- 
Florian