[PATCH v2 3/8] gpio: mxc: use new generic GPIO chip API

Bartosz Golaszewski brgl at bgdev.pl
Wed Jul 2 02:22:10 PDT 2025


From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>

Convert the driver to using the new generic GPIO chip interfaces from
linux/gpio/generic.h.

Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
---
 drivers/gpio/gpio-mxc.c | 41 ++++++++++++++++++++++++-----------------
 1 file changed, 24 insertions(+), 17 deletions(-)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 1c37168c8d0a657d7f93067d9ac95cfbd821f757..433cbadc3a4cc67ebc89a4702280975fa8d2c9bc 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -23,6 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/syscore_ops.h>
 #include <linux/gpio/driver.h>
+#include <linux/gpio/generic.h>
 #include <linux/of.h>
 #include <linux/bug.h>
 
@@ -65,7 +66,7 @@ struct mxc_gpio_port {
 	int irq_high;
 	void (*mx_irq_handler)(struct irq_desc *desc);
 	struct irq_domain *domain;
-	struct gpio_chip gc;
+	struct gpio_generic_chip gen_gc;
 	struct device *dev;
 	u32 both_edges;
 	struct mxc_gpio_reg_saved gpio_saved_reg;
@@ -179,7 +180,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 		if (GPIO_EDGE_SEL >= 0) {
 			edge = GPIO_INT_BOTH_EDGES;
 		} else {
-			val = port->gc.get(&port->gc, gpio_idx);
+			val = port->gen_gc.gc.get(&port->gen_gc.gc, gpio_idx);
 			if (val) {
 				edge = GPIO_INT_LOW_LEV;
 				pr_debug("mxc: set GPIO %d to low trigger\n", gpio_idx);
@@ -200,7 +201,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 		return -EINVAL;
 	}
 
-	scoped_guard(raw_spinlock_irqsave, &port->gc.bgpio_lock) {
+	scoped_guard(gpio_generic_lock_irqsave, &port->gen_gc) {
 		if (GPIO_EDGE_SEL >= 0) {
 			val = readl(port->base + GPIO_EDGE_SEL);
 			if (edge == GPIO_INT_BOTH_EDGES)
@@ -222,7 +223,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 		port->pad_type[gpio_idx] = type;
 	}
 
-	return port->gc.direction_input(&port->gc, gpio_idx);
+	return port->gen_gc.gc.direction_input(&port->gen_gc.gc, gpio_idx);
 }
 
 static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
@@ -231,7 +232,7 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 	u32 bit, val;
 	int edge;
 
-	guard(raw_spinlock_irqsave)(&port->gc.bgpio_lock);
+	guard(gpio_generic_lock_irqsave)(&port->gen_gc);
 
 	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
 	bit = gpio & 0xf;
@@ -414,6 +415,7 @@ static void mxc_update_irq_chained_handler(struct mxc_gpio_port *port, bool enab
 
 static int mxc_gpio_probe(struct platform_device *pdev)
 {
+	struct gpio_generic_chip_config config = { };
 	struct device_node *np = pdev->dev.of_node;
 	struct mxc_gpio_port *port;
 	int irq_count;
@@ -473,27 +475,31 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 		port->mx_irq_handler = mx3_gpio_irq_handler;
 
 	mxc_update_irq_chained_handler(port, true);
-	err = bgpio_init(&port->gc, &pdev->dev, 4,
-			 port->base + GPIO_PSR,
-			 port->base + GPIO_DR, NULL,
-			 port->base + GPIO_GDIR, NULL,
-			 BGPIOF_READ_OUTPUT_REG_SET);
+
+	config.dev = &pdev->dev;
+	config.sz = 4;
+	config.dat = port->base + GPIO_PSR;
+	config.set = port->base + GPIO_DR;
+	config.dirout = port->base + GPIO_GDIR;
+	config.flags = BGPIOF_READ_OUTPUT_REG_SET;
+
+	err = gpio_generic_chip_init(&port->gen_gc, &config);
 	if (err)
 		goto out_bgio;
 
-	port->gc.request = mxc_gpio_request;
-	port->gc.free = mxc_gpio_free;
-	port->gc.to_irq = mxc_gpio_to_irq;
+	port->gen_gc.gc.request = mxc_gpio_request;
+	port->gen_gc.gc.free = mxc_gpio_free;
+	port->gen_gc.gc.to_irq = mxc_gpio_to_irq;
 	/*
 	 * Driver is DT-only, so a fixed base needs only be maintained for legacy
 	 * userspace with sysfs interface.
 	 */
 	if (IS_ENABLED(CONFIG_GPIO_SYSFS))
-		port->gc.base = of_alias_get_id(np, "gpio") * 32;
+		port->gen_gc.gc.base = of_alias_get_id(np, "gpio") * 32;
 	else /* silence boot time warning */
-		port->gc.base = -1;
+		port->gen_gc.gc.base = -1;
 
-	err = devm_gpiochip_add_data(&pdev->dev, &port->gc, port);
+	err = devm_gpiochip_add_data(&pdev->dev, &port->gen_gc.gc, port);
 	if (err)
 		goto out_bgio;
 
@@ -567,7 +573,8 @@ static bool mxc_gpio_generic_config(struct mxc_gpio_port *port,
 	if (of_device_is_compatible(np, "fsl,imx8dxl-gpio") ||
 	    of_device_is_compatible(np, "fsl,imx8qxp-gpio") ||
 	    of_device_is_compatible(np, "fsl,imx8qm-gpio"))
-		return (gpiochip_generic_config(&port->gc, offset, conf) == 0);
+		return (gpiochip_generic_config(&port->gen_gc.gc,
+						offset, conf) == 0);
 
 	return false;
 }

-- 
2.48.1




More information about the linux-arm-kernel mailing list