[PATCH RFT net-next 06/10] arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens at csie.org>

The external Ethernet PHY has a reset pin that is connected to the SoC.
It is missing from the original submission.

Add it to complete the description.

Fixes: acca163f3f51 ("arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board")
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
index 8bc0f2c72a24..c57ecc420aed 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
@@ -70,6 +70,9 @@ &mdio0 {
 	ext_rgmii_phy: ethernet-phy at 1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
 	};
 };
 
-- 
2.39.5