[PATCH] arm64: dts: ti: am64-phyboard-electra: Add DT overlay for X27 connector

[Daniel Schultz]

Hi,

On 27.01.25 18:24, Krzysztof Kozlowski wrote:
> On 27/01/2025 07:57, Daniel Schultz wrote:
>> +&main_spi1 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&main_spi1_pins_default>;
>> +	ti,pindir-d0-out-d1-in = <1>;
>> +	status = "okay";
>> +
>> +	spidev at 0 {
>
> Node names should be generic. See also an explanation and list of
> examples (not exhaustive) in DT specification:
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>
>
>> +		compatible = "rohm,dh2228fv";
>
> That's not the device you have there. You cannot use other compatibles.

I will remove that device for now and see if I can find a supported 
device on Sparkfun or similar, which I can add later.

- Daniel

>
>
> Best regards,
> Krzysztof