[PATCH v2 0/8] Support Multi-frequency scale for UFS

[neil.armstrong at linaro.org]

Hi,

On 22/01/2025 11:02, Ziqi Chen wrote:
> With OPP V2 enabled, devfreq can scale clocks amongst multiple frequency
> plans. However, the gear speed is only toggled between min and max during
> clock scaling. Enable multi-level gear scaling by mapping clock frequencies
> to gear speeds, so that when devfreq scales clock frequencies we can put
> the UFS link at the appropraite gear speeds accordingly.
> 
> This series has been tested on below platforms -
> sm8550 mtp + UFS3.1
> SM8650 MTP + UFS3.1
> SM8750 MTP + UFS4.0

Thanks, could you be more precise on how you tested this feature ? how did you exercise the gear changes and check that is cales correctly ?

Thanks,
Neil

> 
> v1 -> v2:
> 1. Withdraw old patch 8/8 "ARM: dts: msm: Use Operation Points V2 for UFS on SM8650"
> 2. Add new patch 8/8 "ABI: sysfs-driver-ufs: Add missing UFS sysfs addributes"
> 3. Modify commit message for  "scsi: ufs: core: Pass target_freq to clk_scale_notify() vops" and "scsi: ufs: qcom: Pass target_freq to clk scale pre and post change"
> 4. In "scsi: ufs: qcom: Pass target_freq to clk scale pre and post change", use common Macro HZ_PER_MHZ in function ufs_qcom_set_core_clk_ctrl()
> 5. In "scsi: ufs: qcom: Implement the freq_to_gear_speed() vops", print out freq and gear info as debugging message
> 6. In "scsi: ufs: core: Enable multi-level gear scaling", rename the lable "do_pmc" to "config_pwr_mode"
> 7. In "scsi: ufs: core: Toggle Write Booster during clock", initialize the local variables "wb_en" as "false"
> 
> Can Guo (6):
>    scsi: ufs: core: Pass target_freq to clk_scale_notify() vops
>    scsi: ufs: qcom: Pass target_freq to clk scale pre and post change
>    scsi: ufs: core: Add a vops to map clock frequency to gear speed
>    scsi: ufs: qcom: Implement the freq_to_gear_speed() vops
>    scsi: ufs: core: Enable multi-level gear scaling
>    scsi: ufs: core: Toggle Write Booster during clock scaling base on
>      gear speed
> 
> Ziqi Chen (2):
>    scsi: ufs: core: Check if scaling up is required when disable clkscale
>    ABI: sysfs-driver-ufs: Add missing UFS sysfs addributes
> 
>   Documentation/ABI/testing/sysfs-driver-ufs | 31 ++++++++++
>   drivers/ufs/core/ufshcd-priv.h             | 17 +++++-
>   drivers/ufs/core/ufshcd.c                  | 71 ++++++++++++++++------
>   drivers/ufs/host/ufs-mediatek.c            |  1 +
>   drivers/ufs/host/ufs-qcom.c                | 66 +++++++++++++++-----
>   include/ufs/ufshcd.h                       |  8 ++-
>   6 files changed, 159 insertions(+), 35 deletions(-)
>