[RFC PATCH 04/10] net: ti: prueth: Adds link detection, RX and TX support.
Christophe JAILLET
christophe.jaillet at wanadoo.fr
Wed Jan 22 23:16:09 PST 2025
Le 09/01/2025 à 11:55, Basharath Hussain Khaja a écrit :
> From: Roger Quadros <rogerq at ti.com>
>
> Changes corresponding to link configuration such as speed and duplexity.
> IRQ and handler initializations are performed for packet reception.Firmware
> receives the packet from the wire and stores it into OCMC queue. Next, it
> notifies the CPU via interrupt. Upon receiving the interrupt CPU will
> service the IRQ and packet will be processed by pushing the newly allocated
> SKB to upper layers.
>
> When the user application want to transmit a packet, it will invoke
> sys_send() which will inturn invoke the PRUETH driver, then it will write
> the packet into OCMC queues. PRU firmware will pick up the packet and
> transmit it on to the wire.
Hi,
a few nitpicks.
...
> +static int icssm_prueth_tx_enqueue(struct prueth_emac *emac,
> + struct sk_buff *skb,
> + enum prueth_queue_id queue_id)
> +{
> + struct prueth_queue_desc __iomem *queue_desc;
> + const struct prueth_queue_info *txqueue;
> + u16 bd_rd_ptr, bd_wr_ptr, update_wr_ptr;
> + struct net_device *ndev = emac->ndev;
> + unsigned int buffer_desc_count;
> + int free_blocks, update_block;
> + bool buffer_wrapped = false;
> + int write_block, read_block;
> + void *src_addr, *dst_addr;
> + int pkt_block_size;
> + void __iomem *dram;
> + int txport, pktlen;
> + u32 wr_buf_desc;
> + void *ocmc_ram;
> +
> + dram = emac->prueth->mem[emac->dram].va;
> + if (eth_skb_pad(skb)) {
> + if (netif_msg_tx_err(emac) && net_ratelimit())
> + netdev_err(ndev, "packet pad failed");
Missing trailing \n.
> + return -ENOMEM;
> + }
> +
> + /* which port to tx: MII0 or MII1 */
> + txport = emac->tx_port_queue;
...
> +static int icssm_emac_request_irqs(struct prueth_emac *emac)
> +{
> + struct net_device *ndev = emac->ndev;
> + int ret = 0;
No need to init.
> +
> + ret = request_threaded_irq(emac->rx_irq, NULL, icssm_emac_rx_thread,
> + IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> + ndev->name, ndev);
> + if (ret) {
> + netdev_err(ndev, "unable to request RX IRQ\n");
> + return ret;
> + }
...
> +static int icssm_emac_ndo_start_xmit(struct sk_buff *skb,
> + struct net_device *ndev)
> +{
> + struct prueth_emac *emac = netdev_priv(ndev);
> + int ret = 0;
> + u16 qid;
> +
> + if (unlikely(!emac->link)) {
> + if (netif_msg_tx_err(emac) && net_ratelimit())
> + netdev_err(ndev, "No link to transmit");
\n
> + goto fail_tx;
> + }
> +
> + qid = icssm_prueth_get_tx_queue_id(emac->prueth, skb);...
CJ
More information about the linux-arm-kernel
mailing list