[PATCH 3/3] ARM: dts: imx6ul: Add Variscite Concerto board support

[Krzysztof Kozlowski]

On 21/01/2025 10:33, Antonin Godard wrote:
> This patch adds support for the Variscite Concerto Carrier Board.

Please do not use "This commit/patch/change", but imperative mood. See
longer explanation here:
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
> 
> This Carrier-Board has the following:
> - LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch
>   display (not configured)
> - USB Host + USB OTG Connector
> - 10/100 Mbps Ethernet
> - miniPCI-Express slot
> - SD Card connector
> - Audio Headphone/Line In jack connectors
> - S-ATA
> - On-board DMIC
> 
> Product Page: https://www.variscite.com/product/single-board-computers/concerto-board
> 
> This file is based on the one provided by Variscite on their own kernel,
> but adapted for mainline.
> 
> Signed-off-by: Antonin Godard <antonin.godard at bootlin.com>
> ---
>  arch/arm/boot/dts/nxp/imx/Makefile                 |   1 +
>  .../boot/dts/nxp/imx/imx6ul-var-som-concerto.dts   | 331 +++++++++++++++++++++
>  2 files changed, 332 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
> index 39a153536d2a2b8f75b5fbe4332660f89442064a..94c9bc94cc8e2daa1fb3b5686b0b58db1f6678b6 100644
> --- a/arch/arm/boot/dts/nxp/imx/Makefile
> +++ b/arch/arm/boot/dts/nxp/imx/Makefile
> @@ -329,6 +329,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
>  	imx6ul-tx6ul-0010.dtb \
>  	imx6ul-tx6ul-0011.dtb \
>  	imx6ul-tx6ul-mainboard.dtb \
> +	imx6ul-var-som-concerto.dtb \
>  	imx6ull-14x14-evk.dtb \
>  	imx6ull-colibri-aster.dtb \
>  	imx6ull-colibri-emmc-aster.dtb \
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
> new file mode 100644
> index 0000000000000000000000000000000000000000..4289641d94c5a72ba985f339652039dbf13da40c
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
> @@ -0,0 +1,331 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-MX6UL
> + * Variscite SoM mounted on it
> + *
> + * Copyright 2019 Variscite Ltd.
> + * Copyright 2025 Bootlin
> + */
> +
> +#include "imx6ul-var-som.dtsi"
> +
> +/ {
> +	model = "Variscite VAR-SOM-MX6UL Concerto Board";
> +	compatible = "variscite,mx6concerto", "variscite,var-som-imx6ul", "fsl,imx6ul";
> +
> +	backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm4 0 20000 0>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +		status = "okay";

Which file disables it?

> +	};
> +
> +	chosen {
> +		stdout-path = &uart1;
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_key_back>, <&pinctrl_gpio_key_wakeup>;
> +
> +		key-back {
> +			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_BACK>;
> +		};
> +
> +		key-wakeup {
> +			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_WAKEUP>;
> +			wakeup-source;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_leds>;
> +
> +		gpled2 {

led-0
led-1
led-2

Are there other leds here?


> +			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";

Missing function and color

> +		};
> +	};
> +};
> +
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	status = "okay";
> +};
> +
> +&fec1 {
> +	status = "disabled";
> +};
> +
> +&fec2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_gpio>, <&pinctrl_enet2_mdio>;
> +	phy-mode = "rmii";
> +	phy-handle = <&ethphy1>;
> +	phy-reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
> +	phy-reset-duration = <100>;
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy1: ethernet-phy at 3 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			micrel,rmii-reference-clock-select-25-mhz = <1>;
> +			micrel,led-mode = <0>;
> +			clocks = <&rmii_ref_clk>;
> +			clock-names = "rmii-ref";
> +			reg = <3>;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	/* DS1337 RTC module */

Drop comment, obvious. This cannot be anything else, because node name
and compatible told that.

> +	rtc at 68 {
> +		/*
> +		 * To actually use this interrupt
> +		 * connect pins J14.8 & J14.10 on the Concerto-Board.
> +		 */
> +		compatible = "dallas,ds1337";
> +		reg = <0x68>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_rtc>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
> +	};
> +};


Best regards,
Krzysztof