[PATCH stm32-next v3 0/2] ARM: dts: stm32: lxa-fairytux2: add gen{1,2} boards

[Marc Kleine-Budde]

Hello,

this series adds support for the Linux Automation GmbH FairyTux2
boards generation 1 and 2.

The FairyTux2 is a small Linux device based on an Octavo Systems
OSD32MP153c SiP, that occupies just two slots on a DIN rail.

regards,
Marc

Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
---
Changes in v3:
- 2/2: fix use generic node names for external GPIO and USB Type-C controller (thanks Krzysztof)
- 2/2: LEDs: replace label by color and function property (thanks Krzysztof)
- 2/2: gen2: sort nodes of i2c1 by address (thanks Krzysztof)
- Link to v2: https://patch.msgid.link/20250120-lxa-fairytux-v2-0-95f4a0eaa44d@pengutronix.de

Changes in v2:
- 1/2: Added Krzysztof's Acked-by
- 2/2: fix alignment for gpio-line-names (thanks Krzysztof)
- 2/2: only use color:function for LED labels (thanks Krzysztof)
- 2/2: use generic node names for external GPIO and USB Type-C controller
- Link to v1: https://patch.msgid.link/20241210-lxa-fairytux-v1-0-9aea01cdb83e@pengutronix.de

---
Leonard Göhrs (2):
      dt-bindings: arm: stm32: add compatible strings for Linux Automation GmbH LXA FairyTux 2
      ARM: dts: stm32: lxa-fairytux2: add Linux Automation GmbH FairyTux 2

 .../devicetree/bindings/arm/stm32/stm32.yaml       |   2 +
 arch/arm/boot/dts/st/Makefile                      |   2 +
 .../boot/dts/st/stm32mp153c-lxa-fairytux2-gen1.dts | 103 ++++++
 .../boot/dts/st/stm32mp153c-lxa-fairytux2-gen2.dts | 147 ++++++++
 .../arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi | 397 +++++++++++++++++++++
 5 files changed, 651 insertions(+)
---
base-commit: b7ebfb84a09de6b44492974339654d8ffc5ad9e1
change-id: 20241210-lxa-fairytux-e730979d3d3f

Best regards,
-- 
Marc Kleine-Budde <mkl at pengutronix.de>