[PATCH net v2 1/3] net: stmmac: Limit the number of MTL queues to hardware capability

[Kunihiko Hayashi]

The number of MTL queues to use is specified by the parameter
"snps,{tx,rx}-queues-to-use" from stmmac_platform layer.

However, the maximum numbers of queues are constrained by upper limits
determined by the capability of each hardware feature. It's appropriate
to limit the values not to exceed the upper limit values and display
a warning message.

Fixes: d976a525c371 ("net: stmmac: multiple queues dt configuration")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 7bf275f127c9..251a8c15637f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7232,6 +7232,19 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 	if (priv->dma_cap.tsoen)
 		dev_info(priv->device, "TSO supported\n");
 
+	if (priv->plat->rx_queues_to_use > priv->dma_cap.number_rx_queues) {
+		dev_warn(priv->device,
+			 "Number of Rx queues exceeds dma capability (%d)\n",
+			 priv->plat->rx_queues_to_use);
+		priv->plat->rx_queues_to_use = priv->dma_cap.number_rx_queues;
+	}
+	if (priv->plat->tx_queues_to_use > priv->dma_cap.number_tx_queues) {
+		dev_warn(priv->device,
+			 "Number of Tx queues exceeds dma capability (%d)\n",
+			 priv->plat->tx_queues_to_use);
+		priv->plat->tx_queues_to_use = priv->dma_cap.number_tx_queues;
+	}
+
 	priv->hw->vlan_fail_q_en =
 		(priv->plat->flags & STMMAC_FLAG_VLAN_FAIL_Q_EN);
 	priv->hw->vlan_fail_q = priv->plat->vlan_fail_q;
-- 
2.25.1