[PATCH] arm64: dts: ti: k3-j722s-evm: Fix USB2.0_MUX_SEL to select Type-C

[Roger Quadros]

On 16/01/2025 14:57, Hrushikesh Salunke wrote:
> J722S SOC has two usb controllers USB0 and USB1. USB0 is brought out on
> the EVM as a stacked USB connector which has one Type-A and one Type-C
> port. These Type-A and Type-C ports are connected to MUX so only
> one of them can be enabled at a time.
> 
> Commit under Fixes, tries to enable the USB0 instance of USB to
> interface with the Type-C port via the USB hub, by configuring the
> USB2.0_MUX_SEL to GPIO_ACTIVE_HIGH. But it is observed on J722S-EVM
> that Type-A port is enabled instead of Type-C port.
> 
> Fix this by setting USB2.0_MUX_SEL to GPIO_ACTIVE_LOW to enable Type-C
> port.
> 
> Fixes: 485705df5d5f ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM")
> Signed-off-by: Hrushikesh Salunke <h-salunke at ti.com>

Reviewed-by: Roger Quadros <rogerq at kernel.org>