[PATCH 3/5] spi: zynqmp-gqspi: Abort operations on timeout

Michal Simek michal.simek at amd.com
Thu Jan 16 23:15:19 PST 2025



On 1/16/25 23:55, Sean Anderson wrote:
> When an operation times out, we leave the device (and driver) in an
> inconsistent state. This generally results in all subsequent operations
> timing out. Attempt to address this by resetting/reinitializing the
> device when we have a timeout. This tends to be fairly robust.
> 
> Signed-off-by: Sean Anderson <sean.anderson at linux.dev>
> ---
> 
>   drivers/spi/spi-zynqmp-gqspi.c | 30 ++++++++++++++++++++----------
>   1 file changed, 20 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
> index 7d138f45b692..cf47466ec982 100644
> --- a/drivers/spi/spi-zynqmp-gqspi.c
> +++ b/drivers/spi/spi-zynqmp-gqspi.c
> @@ -1057,6 +1057,21 @@ static unsigned long zynqmp_qspi_timeout(struct zynqmp_qspi *xqspi, u8 bits,
>   	return msecs_to_jiffies(timeout + 100);
>   }
>   
> +

unnecessary newline here.

> +static int zynqmp_qspi_wait(struct zynqmp_qspi *xqspi, unsigned long timeout)
> +{
> +	int ret;
> +
> +	ret = wait_for_completion_timeout(&xqspi->data_completion, timeout);
> +	if (ret)
> +		return 0;

newline here please

> +	dev_err(xqspi->dev, "Operation timed out\n");
> +
> +	/* Attempt to recover as best we can */
> +	zynqmp_qspi_init_hw(xqspi);
> +	return -ETIMEDOUT;
> +}
> +
>   /**
>    * zynqmp_qspi_exec_op() - Initiates the QSPI transfer
>    * @mem: The SPI memory
> @@ -1104,11 +1119,9 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
>   				   GQSPI_IER_TXNOT_FULL_MASK);
>   		timeout = zynqmp_qspi_timeout(xqspi, op->cmd.buswidth,
>   					      op->cmd.nbytes);
> -		if (!wait_for_completion_timeout(&xqspi->data_completion,
> -						 timeout)) {
> -			err = -ETIMEDOUT;
> +		err = zynqmp_qspi_wait(xqspi, timeout);
> +		if (err)
>   			goto return_err;
> -		}
>   	}
>   
>   	if (op->addr.nbytes) {
> @@ -1133,11 +1146,9 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
>   				   GQSPI_IER_TXNOT_FULL_MASK);
>   		timeout = zynqmp_qspi_timeout(xqspi, op->addr.buswidth,
>   					      op->addr.nbytes);
> -		if (!wait_for_completion_timeout(&xqspi->data_completion,
> -						 timeout)) {
> -			err = -ETIMEDOUT;
> +		err = zynqmp_qspi_wait(xqspi, timeout);
> +		if (err)
>   			goto return_err;
> -		}
>   	}
>   
>   	if (op->dummy.nbytes) {
> @@ -1204,8 +1215,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
>   		}
>   		timeout = zynqmp_qspi_timeout(xqspi, op->data.buswidth,
>   					      op->data.nbytes);
> -		if (!wait_for_completion_timeout(&xqspi->data_completion, timeout))
> -			err = -ETIMEDOUT;
> +		err = zynqmp_qspi_wait(xqspi, timeout);
>   	}
>   
>   return_err:

M




More information about the linux-arm-kernel mailing list