[PATCH] arm64: dts: mediatek: mt7622: Align GPIO hog name with bindings

[Krzysztof Kozlowski]

Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:

  mt7622-bananapi-bpi-r64.dtb: asm_sel: $nodename:0: 'asm_sel' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index d12eac9b3eeb..9f100b18a676 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -320,7 +320,7 @@ &pio {
 	/* Attention: GPIO 90 is used to switch between PCIe at 1,0 and
 	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
 	 */
-	asm_sel {
+	asm-sel-hog {
 		gpio-hog;
 		gpios = <90 GPIO_ACTIVE_HIGH>;
 		output-high;
-- 
2.43.0