[PATCH] ARM: dts: st: ste-nomadik: Align GPIO hog name with bindings

[Krzysztof Kozlowski]

Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:

  ste-nomadik-s8815.dtb: mmcsd-gpio: $nodename:0: 'mmcsd-gpio' does not match '^.+-hog(-[0-9]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm/boot/dts/st/ste-nomadik-s8815.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/st/ste-nomadik-s8815.dts b/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
index c905c2643a12..2f642c88f288 100644
--- a/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
@@ -23,7 +23,7 @@ aliases {
 
 	gpio3: gpio at 101e7000 {
 		/* This hog will bias the MMC/SD card detect line */
-		mmcsd-gpio {
+		mmcsd-hog {
 			gpio-hog;
 			gpios = <16 0x0>;
 			output-low;
-- 
2.43.0