[PATCH v4 1/4] arm64: dts: s32g: add 'I2C' common board support

[Ciprian Marian Costea]

On 12/20/2024 5:44 PM, Frank Li wrote:
> On Fri, Dec 20, 2024 at 02:39:13PM +0200, Ciprian Costea wrote:
> 

Hello Frank,

> Subject is wrong, this patch is not for common board
> 
> Simple said:  "Add I2C[0..2] support for s32g2 and s32g3"
> 
>> From: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>
>>
>> On both 'S32G2' and 'S32G3' SoCs there are five i2c controllers available
>> (i2c0-i2c4). Specific S32G2/S32G3 based board 'i2c' dts device support
>> will be added in further commits.
> 
> This commit have not touch "based board".
> 
> So"Add I2C[0..2] for S32G and S32G3 SoCs commit dts."
> 
> Allow only copy subject here for such simple add some nodes.
> 

Thanks. I will update accordingly in V5.

>>
>> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>
>> ---
>>   arch/arm64/boot/dts/freescale/s32g2.dtsi | 55 ++++++++++++++++++++++
>>   arch/arm64/boot/dts/freescale/s32g3.dtsi | 60 ++++++++++++++++++++++++
>>   2 files changed, 115 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
>> index 7be430b78c83..1a9683c234b7 100644
>> --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
>> @@ -333,6 +333,39 @@ uart1: serial at 401cc000 {
>>   			status = "disabled";
>>   		};
>>
>> +		i2c0: i2c at 401e4000 {
>> +			compatible = "nxp,s32g2-i2c";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x401e4000 0x1000>;
> 
> reg should just after compatible.
> 
> Frank
> 

Ok, I have nothing against this. I will update in V5 as I see now newer 
dtsi follow this.

>> +			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clks 40>;
>> +			clock-names = "ipg";
>> +			status = "disabled";
>> +		};
>> +
>> +		i2c1: i2c at 401e8000 {
>> +			compatible = "nxp,s32g2-i2c";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x401e8000 0x1000>;
>> +			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clks 40>;
>> +			clock-names = "ipg";
>> +			status = "disabled";
>> +		};
>> +
>> +		i2c2: i2c at 401ec000 {
>> +			compatible = "nxp,s32g2-i2c";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x401ec000 0x1000>;
>> +			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clks 40>;
>> +			clock-names = "ipg";
>> +			status = "disabled";
>> +		};
>> +
>>   		uart2: serial at 402bc000 {
>>   			compatible = "nxp,s32g2-linflexuart",
>>   				     "fsl,s32v234-linflexuart";
>> @@ -341,6 +374,28 @@ uart2: serial at 402bc000 {
>>   			status = "disabled";
>>   		};
>>
>> +		i2c3: i2c at 402d8000 {
>> +			compatible = "nxp,s32g2-i2c";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x402d8000 0x1000>;
>> +			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clks 40>;
>> +			clock-names = "ipg";
>> +			status = "disabled";
>> +		};
>> +
>> +		i2c4: i2c at 402dc000 {
>> +			compatible = "nxp,s32g2-i2c";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x402dc000 0x1000>;
>> +			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clks 40>;
>> +			clock-names = "ipg";
>> +			status = "disabled";
>> +		};
>> +
>>   		usdhc0: mmc at 402f0000 {
>>   			compatible = "nxp,s32g2-usdhc";
>>   			reg = <0x402f0000 0x1000>;
>> diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
>> index 6c572ffe37ca..5d28b439906d 100644
>> --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
>> @@ -390,6 +390,42 @@ uart1: serial at 401cc000 {
>>   			status = "disabled";
>>   		};
>>
>> +		i2c0: i2c at 401e4000 {
>> +			compatible = "nxp,s32g3-i2c",
>> +				     "nxp,s32g2-i2c";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x401e4000 0x1000>;
>> +			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clks 40>;
>> +			clock-names = "ipg";
>> +			status = "disabled";
>> +		};
>> +
>> +		i2c1: i2c at 401e8000 {
>> +			compatible = "nxp,s32g3-i2c",
>> +				     "nxp,s32g2-i2c";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x401e8000 0x1000>;
>> +			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clks 40>;
>> +			clock-names = "ipg";
>> +			status = "disabled";
>> +		};
>> +
>> +		i2c2: i2c at 401ec000 {
>> +			compatible = "nxp,s32g3-i2c",
>> +				     "nxp,s32g2-i2c";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x401ec000 0x1000>;
>> +			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clks 40>;
>> +			clock-names = "ipg";
>> +			status = "disabled";
>> +		};
>> +
>>   		uart2: serial at 402bc000 {
>>   			compatible = "nxp,s32g3-linflexuart",
>>   				     "fsl,s32v234-linflexuart";
>> @@ -398,6 +434,30 @@ uart2: serial at 402bc000 {
>>   			status = "disabled";
>>   		};
>>
>> +		i2c3: i2c at 402d8000 {
>> +			compatible = "nxp,s32g3-i2c",
>> +				     "nxp,s32g2-i2c";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x402d8000 0x1000>;
>> +			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clks 40>;
>> +			clock-names = "ipg";
>> +			status = "disabled";
>> +		};
>> +
>> +		i2c4: i2c at 402dc000 {
>> +			compatible = "nxp,s32g3-i2c",
>> +				     "nxp,s32g2-i2c";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x402dc000 0x1000>;
>> +			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clks 40>;
>> +			clock-names = "ipg";
>> +			status = "disabled";
>> +		};
>> +
>>   		usdhc0: mmc at 402f0000 {
>>   			compatible = "nxp,s32g3-usdhc",
>>   				     "nxp,s32g2-usdhc";
>> --
>> 2.45.2
>>

Best Regards,
Ciprian