[PATCH net-next 5/5] net: stmmac: stm32: Use syscon_regmap_lookup_by_phandle_args

[Yanteng Si]

在 2025/1/12 21:32, Krzysztof Kozlowski 写道:
> Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
> syscon_regmap_lookup_by_phandle() combined with getting the syscon
> argument.  Except simpler code this annotates within one line that given
> phandle has arguments, so grepping for code would be easier.
> 
> There is also no real benefit in printing errors on missing syscon
> argument, because this is done just too late: runtime check on
> static/build-time data.  Dtschema and Devicetree bindings offer the
> static/build-time check for this already.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> ---
>   drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 9 ++-------
>   1 file changed, 2 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
> index 1e8bac665cc9bc95c3aa96e87a8e95d9c63ba8e1..1fcb74e9e3ffacdc7581b267febb55d015a83aed 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
> @@ -419,16 +419,11 @@ static int stm32_dwmac_parse_data(struct stm32_dwmac *dwmac,
>   	}
>   
>   	/* Get mode register */
> -	dwmac->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscon");
> +	dwmac->regmap = syscon_regmap_lookup_by_phandle_args(np, "st,syscon",
> +							     1, &dwmac->mode_reg);
The network subsystem still requires that the length of
each line of code should not exceed 80 characters.
So, let's silence the warning:

WARNING: line length of 83 exceeds 80 columns
#33: FILE: drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c:307:
+							     &dwmac->intf_reg_off);


BTW, The other two stmmac patches also need to adjust
the code so that each line doesn't exceed 80 characters.

Thanks,
Yanteng