[PATCH 2/2] dt-bindings: clock: imx5: Fix the CCM interrupts description

[Rob Herring (Arm)]

On Sun, 12 Jan 2025 09:29:39 -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam at denx.de>
> 
> On the i.MX5 chips the peripheral interrupts are represented directly only
> by their interrupt numbers.
> 
> Make the CCM nodes to follow this format.
> 
> Signed-off-by: Fabio Estevam <festevam at denx.de>
> ---
>  Documentation/devicetree/bindings/clock/imx5-clock.yaml | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/imx5-clock.example.dtb: clock-controller at 53fd4000: interrupts: [[71, 72]] is too short
	from schema $id: http://devicetree.org/schemas/clock/imx5-clock.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250112122939.988309-2-festevam@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.