[PATCH v2 0/2] fix some binding check errors for marvell

[Gregory CLEMENT]

Frank Wunderlich <linux at fw-web.de> writes:

> From: Frank Wunderlich <frank-w at public-files.de>
>
> Thies series fixes some Errors reported by dtbs_check. First part is taken
> from my old series [1] where i converted sata-platform txt binding to yaml
> because it wasn't picked up.
>
> [1] https://lore.kernel.org/linux-arm-kernel/20220311210357.222830-1-linux@fw-web.de/
>
> I only try to fix the binding errors, i do not have any marvell board, so
> cannot verify that my changes are correct. From my PoV peripheral
> controllers should be disabled in the SoC DT and enabled in board DT.
>
> Frank Wunderlich (2):
>   arm64: dts: marvell: only enable complete sata nodes
>   arm64: dts: marvell: drop additional phy-names for sata


Applied on mvebu/dt64

Thanks,

Gregory

>
>  arch/arm64/boot/dts/marvell/armada-7040-db.dts             | 1 +
>  arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts       | 2 ++
>  arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 1 +
>  arch/arm64/boot/dts/marvell/armada-8040-db.dts             | 5 +++--
>  arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi         | 3 +--
>  arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts    | 2 ++
>  arch/arm64/boot/dts/marvell/armada-cp11x.dtsi              | 2 ++
>  arch/arm64/boot/dts/marvell/cn9130-crb-B.dts               | 1 +
>  arch/arm64/boot/dts/marvell/cn9131-db.dtsi                 | 1 +
>  arch/arm64/boot/dts/marvell/cn9132-db.dtsi                 | 1 +
>  10 files changed, 15 insertions(+), 4 deletions(-)
>
> -- 
> 2.43.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com