[PATCH 1/5] arm64: dts: imx8-ss-hsio: Wire up DMA IRQ for PCIe

[Alexander Stein]

IRQ mapping is already present. Add the missing DMA interrupt.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
index 70a8aa1a67911..4bdfc15487cbc 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
@@ -57,8 +57,9 @@ pcieb: pcie at 5f010000 {
 		ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
 			 <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
 		#interrupt-cells = <1>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi";
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi", "dma";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>,
-- 
2.34.1