[PATCH v3 2/4] dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi

[Ivaylo Ivanov]

On 1/6/25 08:31, Krzysztof Kozlowski wrote:
> On Sun, Jan 05, 2025 at 06:03:44PM +0200, Ivaylo Ivanov wrote:
>>    samsung,mode:
>>      $ref: /schemas/types.yaml#/definitions/uint32
>> -    enum: [0, 1, 2, 3]
>> +    enum: [0, 1, 2, 3, 4, 5, 6]
>>      description:
>>        Selects USI function (which serial protocol to use). Refer to
>>        <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values.
>> @@ -101,37 +111,62 @@ required:
>>    - samsung,sysreg
>>    - samsung,mode
>>  
>> -if:
>> -  properties:
>> -    compatible:
>> -      contains:
>> -        enum:
>> -          - samsung,exynos850-usi
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - google,gs101-usi
>> +              - samsung,exynos850-usi
>> +              - samsung,exynosautov9-usi
>> +              - samsung,exynosautov920-usi
> I made mistake during last review - the binding had a confusing "else"
> here, but that else was a no-op. All existing compatibles are fallbacked
> to samsung,exynos850-usi, so previous code "contains: enum:
> samsung,exynos850-usi" was covering everything.
>
> You can drop other variants and keep the original samsung,exynos850-usi
> only.

Yeah I thought so too. It's fine, will fix in the next revision.

>
>> +
>> +    then:
>> +      properties:
>> +        reg:
>> +          maxItems: 1
>> +
>> +        clocks:
>> +          items:
>> +            - description: Bus (APB) clock
>> +            - description: Operating clock for UART/SPI/I2C protocol
>> +
>> +        clock-names:
>> +          maxItems: 2
>> +
>> +        samsung,mode:
>> +          enum: [0, 1, 2, 3]
>> +
>> +      required:
>> +        - reg
>> +        - clocks
>> +        - clock-names
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - samsung,exynos8895-usi
> I don't see where this compatible is documented.

Right, ommited that. Yet dtbs_check W=1 still didn't catch that.

Thanks for the feedback!

Best regards,
Ivaylo

>
>> +
>> +    then:
>> +      properties:
>> +        reg: false
>> +
>> +        clocks:
>> +          items:
>> +            - description: Bus (APB) clock
>> +            - description: Operating clock for UART/SPI protocol
> Best regards,
> Krzysztof
>