[PATCH v2 4/4] arm64: dts: exynos: gs101-oriole: enable Maxim max77759 fuel gauge

[Thomas Antoine via B4 Relay]

From: Thomas Antoine <t.antoine at uclouvain.be>

Add the node for the max77759 fuel gauge as a slave of the i2c.

The todo is still applicable given there are other slaves on the
bus (pca9468, other max77759 functions and the max20339 OVP).

The fuel gauge has been tested and seems to give coherent results.
Manual activation of the charger via i2cset shows that the sign of
the current does indicate charging/discharging status.

Signed-off-by: Thomas Antoine <t.antoine at uclouvain.be>
---
 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
index 387fb779bd29ea3812331a7951f03b181c5fe659..6c83ee6f8a6b0327c576573d03a8d2bcc93f9e16 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
+++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -10,6 +10,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "gs101-pinctrl.h"
 #include "gs101.dtsi"
 
@@ -90,6 +91,15 @@ eeprom: eeprom at 50 {
 &hsi2c_12 {
 	status = "okay";
 	/* TODO: add the devices once drivers exist */
+
+	fuel-gauge at 36 {
+		compatible = "maxim,max77759-fg";
+		reg = <0x36>;
+		reg-names = "m5";
+		shunt-resistor-micro-ohms = <5000>;
+		interrupt-parent = <&gpa9>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	};
 };
 
 &pinctrl_far_alive {

-- 
2.47.1