[PATCH v2 4/4] arm64: dts: exyno990: enable cmu-peric0/1 clock controller

[Denzeel Oliva]

Enable the cmu-peric0/1 clock controller. It feeds USI and I2C.

Signed-off-by: Denzeel Oliva <wachiturroxd150 at gmail.com>
---
 arch/arm64/boot/dts/exynos/exynos990.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos990.dtsi b/arch/arm64/boot/dts/exynos/exynos990.dtsi
index dd7f99f51..843587b17 100644
--- a/arch/arm64/boot/dts/exynos/exynos990.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos990.dtsi
@@ -231,12 +231,34 @@ pinctrl_peric0: pinctrl at 10430000 {
 			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		cmu_peric0: clock-controller at 10400000 {
+			compatible = "samsung,exynos990-cmu-peric0";
+			reg = <0x10400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
 		pinctrl_peric1: pinctrl at 10730000 {
 			compatible = "samsung,exynos990-pinctrl";
 			reg = <0x10730000 0x1000>;
 			interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		cmu_peric1: clock-controller at 10700000 {
+			compatible = "samsung,exynos990-cmu-peric1";
+			reg = <0x10700000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
 		cmu_hsi0: clock-controller at 10a00000 {
 			compatible = "samsung,exynos990-cmu-hsi0";
 			reg = <0x10a00000 0x8000>;
-- 
2.48.1