[PATCH v2 12/16] ARM: dts: microchip: sama7g5: Add OTPC clocks

Alexander Dahl ada at thorsis.com
Mon Feb 10 22:52:23 PST 2025


These clocks should be enabled, datasheet says:

> The OTPC is clocked through the Power Management Controller (PMC).
> The user must power on the main RC oscillator and enable the
> peripheral clock of the OTPC prior to reading or writing the OTP
> memory.

Earlier discussions suggest, MCK0 must be enabled, too.  MCK0 is parent
of peripheral otpc_clk, so this is done implicitly.

Link: https://lore.kernel.org/linux-clk/ec34efc2-2051-4b8a-b5d8-6e2fd5e08c28@microchip.com/T/#u
Signed-off-by: Alexander Dahl <ada at thorsis.com>
---

Notes:
    v2:
    - new patch, not present in v1

 arch/arm/boot/dts/microchip/sama7g5.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index f68c2eb8edd54..b33204688b90c 100644
--- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -1023,6 +1023,8 @@ otpc: efuse at e8c00000 {
 			reg = <0xe8c00000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_CORE SAMA7G5_PMC_MAIN_RC>, <&pmc PMC_TYPE_PERIPHERAL 67>;
+			clock-names = "main_rc_osc", "otpc_clk";
 
 			temperature_calib: calib at 1 {
 				reg = <OTP_PKT(1) 76>;
-- 
2.39.5




More information about the linux-arm-kernel mailing list