[PATCH v5 04/10] arm64: dts: ti: k3-am62a-main: Add C7xv device node

[Judith Mendez]

From: Jai Luthra <j-luthra at ti.com>

AM62A SoCs have a C7xv DSP subsystem with Analytics engine capability.
This subsystem is intended for deep learning purposes. Define the
device node for C7xv DSP.

Signed-off-by: Jai Luthra <j-luthra at ti.com>
Signed-off-by: Hari Nagalla <hnagalla at ti.com>
Signed-off-by: Judith Mendez <jm at ti.com>
---
Changes since v4:
- No change
---
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index a1daba7b1fad5..f6ebc4eabaf14 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -1123,6 +1123,18 @@ vpu: video-codec at 30210000 {
 		power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;
 	};
 
+	c7x_0: dsp at 7e000000 {
+		compatible = "ti,am62a-c7xv-dsp";
+		reg = <0x00 0x7e000000 0x00 0x00100000>;
+		reg-names = "l2sram";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <208>;
+		ti,sci-proc-ids = <0x04 0xff>;
+		resets = <&k3_reset 208 1>;
+		firmware-name = "am62a-c71_0-fw";
+		status = "disabled";
+	};
+
 	e5010: jpeg-encoder at fd20000 {
 		compatible = "ti,am62a-jpeg-enc", "img,e5010-jpeg-enc";
 		reg = <0x00 0xfd20000 0x00 0x100>,
-- 
2.48.0