[RFC PATCH 1/3] clk: imx: clk-fracn-gppll: Do not access num/denom register for integer PLL

[Alexander Stein]

Similar to clk_fracn_gppll_set_rate(), do not access the numerator and
denominator register for integer PLL. Set MFD/MFN to 0 instead, so the
table lookup will match.
See i.MX93 RM section 74.5.2.1 (PLL memory map) for ARMPLL, addresses
0x40 and 0x50 are not listed/reserved.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 drivers/clk/imx/clk-fracn-gppll.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index 85771afd4698a..3aef548110e25 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -154,17 +154,24 @@ static unsigned long clk_fracn_gppll_recalc_rate(struct clk_hw *hw, unsigned lon
 {
 	struct clk_fracn_gppll *pll = to_clk_fracn_gppll(hw);
 	const struct imx_fracn_gppll_rate_table *rate_table = pll->rate_table;
-	u32 pll_numerator, pll_denominator, pll_div;
+	u32 pll_div;
 	u32 mfi, mfn, mfd, rdiv, odiv;
 	u64 fvco = parent_rate;
 	long rate = 0;
 	int i;
 
-	pll_numerator = readl_relaxed(pll->base + PLL_NUMERATOR);
-	mfn = FIELD_GET(PLL_MFN_MASK, pll_numerator);
+	if (pll->flags & CLK_FRACN_GPPLL_FRACN) {
+		u32 pll_numerator, pll_denominator;
+
+		pll_numerator = readl_relaxed(pll->base + PLL_NUMERATOR);
+		mfn = FIELD_GET(PLL_MFN_MASK, pll_numerator);
 
-	pll_denominator = readl_relaxed(pll->base + PLL_DENOMINATOR);
-	mfd = FIELD_GET(PLL_MFD_MASK, pll_denominator);
+		pll_denominator = readl_relaxed(pll->base + PLL_DENOMINATOR);
+		mfd = FIELD_GET(PLL_MFD_MASK, pll_denominator);
+	} else {
+		mfd = 0;
+		mfn = 0;
+	}
 
 	pll_div = readl_relaxed(pll->base + PLL_DIV);
 	mfi = FIELD_GET(PLL_MFI_MASK, pll_div);
-- 
2.34.1