[PATCH v13 2/2] arm64: dts: qcom: qcs6490-rb3gen2-vision-mezzanine: Add vision mezzanine
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sat Feb 8 14:09:21 PST 2025
On Sat, Feb 08, 2025 at 10:22:32PM +0530, Vikram Sharma wrote:
> The Vision Mezzanine for the rb3gen2 ships with an imx577 camera sensor.
Qualcomm RB3 Gen 2
> Enable the IMX577 on the vision mezzanine.
>
> An example media-ctl pipeline for the imx577 is:
>
> media-ctl --reset
> media-ctl -V '"imx577 '17-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
> media-ctl -V '"msm_csiphy3":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -l '"msm_csiphy3":1->"msm_csid0":0[1]'
> media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
>
> yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0
>
> Signed-off-by: Hariram Purushothaman <quic_hariramp at quicinc.com>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa at quicinc.com>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> Signed-off-by: Vikram Sharma <quic_vikramsa at quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 4 +
> .../qcs6490-rb3gen2-vision-mezzanine.dtso | 89 +++++++++++++++++++
> 2 files changed, 93 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso
>
--
With best wishes
Dmitry
More information about the linux-arm-kernel
mailing list