[PATCH v2 0/4] scmi: Bypass set fwnode and introduce allow/block list to address devlink issue

Peng Fan peng.fan at nxp.com
Mon Feb 3 19:31:04 PST 2025


> Subject: [PATCH v2 0/4] scmi: Bypass set fwnode and introduce
> allow/block list to address devlink issue

Any comments on this patchset?

Thanks,
Peng.

> 
> Current scmi drivers not work well with devlink. This patchset is a retry
> to address the issue in [1] which was a few months ago.
> 
> Current scmi devices are not created from device tree, they are created
> from a scmi_device_id entry of each driver with the protocol matches
> with the fwnode reg value, this means there could be multiple devices
> created for one fwnode, but the fwnode only has one device pointer.
> 
> This patchset is to do more checking before setting the device fwnode.
> And Introduce machine_allowlist and machine_blocklist.
> 
> The reason to introduce machine_blocklist is for case that if pinctrl-
> scmi.c probes before pinctrl-imx-scmi.c probes on i.MX platform.
> Need to block pinctrl-scmi.c on i.MX platform.
> 
> This may looks like hack, but seems no better way to make scmi works
> well with devlink.
> 
> [1]: https://lore.kernel.org/arm-scmi/CAGETcx8m48cy-
> EzP6_uoGN7KWsQw=CfZWQ-hNUzz_7LZ0voG8A at mail.gmail.com/
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
> Changes in v2:
> - Introduce machine_allowlist and machine_blocklist
> - Keep of_node for cpufreq device per Cristian
> - Patch 2 is an optimization patch when fixing the devlink issue
> - Link to v1: https://lore.kernel.org/r/20241225-scmi-fwdevlink-v1-0-
> e9a3a5341362 at nxp.com
> 
> ---
> Peng Fan (4):
>       firmware: arm_scmi: Bypass setting fwnode for scmi cpufreq
>       firmware: arm_scmi: Add machine_allowlist and machine_blocklist
>       pinctrl: freescale: scmi: Switch to use machine_allowlist
>       pinctrl: scmi: Switch to use machine_blocklist
> 
>  drivers/firmware/arm_scmi/bus.c              | 31
> +++++++++++++++++++++++++++-
>  drivers/pinctrl/freescale/pinctrl-imx-scmi.c | 15 ++++++--------
>  drivers/pinctrl/pinctrl-scmi.c               | 15 ++++++--------
>  include/linux/scmi_protocol.h                |  3 +++
>  4 files changed, 45 insertions(+), 19 deletions(-)
> ---
> base-commit: 9dff7bbdd359c73f1b44ab592bbb17e1c174fe43
> change-id: 20241225-scmi-fwdevlink-afb5131f19ea
> 
> Best regards,
> --
> Peng Fan <peng.fan at nxp.com>



More information about the linux-arm-kernel mailing list