[PATCH stm32-next v3 0/2] ARM: dts: stm32: lxa-fairytux2: add gen{1,2} boards

[Alexandre TORGUE]

Hi Marc

On 1/21/25 12:14, Marc Kleine-Budde wrote:
> Hello,
> 
> this series adds support for the Linux Automation GmbH FairyTux2
> boards generation 1 and 2.
> 
> The FairyTux2 is a small Linux device based on an Octavo Systems
> OSD32MP153c SiP, that occupies just two slots on a DIN rail.
> 
> regards,
> Marc
> 
> Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
> ---
> Changes in v3:
> - 2/2: fix use generic node names for external GPIO and USB Type-C controller (thanks Krzysztof)
> - 2/2: LEDs: replace label by color and function property (thanks Krzysztof)
> - 2/2: gen2: sort nodes of i2c1 by address (thanks Krzysztof)
> - Link to v2: https://patch.msgid.link/20250120-lxa-fairytux-v2-0-95f4a0eaa44d@pengutronix.de
> 
> Changes in v2:
> - 1/2: Added Krzysztof's Acked-by
> - 2/2: fix alignment for gpio-line-names (thanks Krzysztof)
> - 2/2: only use color:function for LED labels (thanks Krzysztof)
> - 2/2: use generic node names for external GPIO and USB Type-C controller
> - Link to v1: https://patch.msgid.link/20241210-lxa-fairytux-v1-0-9aea01cdb83e@pengutronix.de
> 
> ---
> Leonard Göhrs (2):
>        dt-bindings: arm: stm32: add compatible strings for Linux Automation GmbH LXA FairyTux 2
>        ARM: dts: stm32: lxa-fairytux2: add Linux Automation GmbH FairyTux 2
> 
>   .../devicetree/bindings/arm/stm32/stm32.yaml       |   2 +
>   arch/arm/boot/dts/st/Makefile                      |   2 +
>   .../boot/dts/st/stm32mp153c-lxa-fairytux2-gen1.dts | 103 ++++++
>   .../boot/dts/st/stm32mp153c-lxa-fairytux2-gen2.dts | 147 ++++++++
>   .../arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi | 397 +++++++++++++++++++++
>   5 files changed, 651 insertions(+)
> ---
> base-commit: b7ebfb84a09de6b44492974339654d8ffc5ad9e1
> change-id: 20241210-lxa-fairytux-e730979d3d3f
> 
> Best regards,

Series applied on stm32-next.

Thanks
Alex