[PATCH] net: stmmac: Allow zero for [tr]x_fifo_size

[Steven Price]

Commit 8865d22656b4 ("net: stmmac: Specify hardware capability value
when FIFO size isn't specified") modified the behaviour to bail out if
both the FIFO size and the hardware capability were both set to zero.
However devices where has_gmac4 and has_xgmac are both false don't use
the fifo size and that commit breaks platforms for which these values
were zero.

Only warn and error out when (has_gmac4 || has_xgmac) where the values
are used and zero would cause problems, otherwise continue with the zero
values.

Fixes: 8865d22656b4 ("net: stmmac: Specify hardware capability value when FIFO size isn't specified")
Tested-by: Xi Ruoyao <xry111 at xry111.site>
Signed-off-by: Steven Price <steven.price at arm.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d04543e5697b..821404beb629 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7222,7 +7222,7 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 	if (!priv->plat->rx_fifo_size) {
 		if (priv->dma_cap.rx_fifo_size) {
 			priv->plat->rx_fifo_size = priv->dma_cap.rx_fifo_size;
-		} else {
+		} else if (priv->plat->has_gmac4 || priv->plat->has_xgmac) {
 			dev_err(priv->device, "Can't specify Rx FIFO size\n");
 			return -ENODEV;
 		}
@@ -7236,7 +7236,7 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 	if (!priv->plat->tx_fifo_size) {
 		if (priv->dma_cap.tx_fifo_size) {
 			priv->plat->tx_fifo_size = priv->dma_cap.tx_fifo_size;
-		} else {
+		} else if (priv->plat->has_gmac4 || priv->plat->has_xgmac) {
 			dev_err(priv->device, "Can't specify Tx FIFO size\n");
 			return -ENODEV;
 		}
-- 
2.43.0