[PATCH net-next v3 03/13] net: phy: phy_caps: Move phy_speeds to phy_caps
Russell King (Oracle)
linux at armlinux.org.uk
Fri Feb 28 08:10:35 PST 2025
On Fri, Feb 28, 2025 at 03:55:28PM +0100, Maxime Chevallier wrote:
> Use the newly introduced link_capabilities array to derive the list of
> possible speeds when given a combination of linkmodes. As
> link_capabilities is indexed by speed, we don't have to iterate the
> whole phy_settings array.
>
> Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
> ---
> drivers/net/phy/phy-caps.h | 3 +++
> drivers/net/phy/phy-core.c | 15 ---------------
> drivers/net/phy/phy.c | 3 ++-
> drivers/net/phy/phy_caps.c | 27 +++++++++++++++++++++++++++
> include/linux/phy.h | 2 --
> 5 files changed, 32 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/net/phy/phy-caps.h b/drivers/net/phy/phy-caps.h
> index 846d483269f6..f8cdfdb09242 100644
> --- a/drivers/net/phy/phy-caps.h
> +++ b/drivers/net/phy/phy-caps.h
> @@ -41,4 +41,7 @@ struct link_capabilities {
>
> void phy_caps_init(void);
>
> +size_t phy_caps_speeds(unsigned int *speeds, size_t size,
> + unsigned long *linkmodes);
> +
> #endif /* __PHY_CAPS_H */
> diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
> index b1c1670de23b..8533e57c3500 100644
> --- a/drivers/net/phy/phy-core.c
> +++ b/drivers/net/phy/phy-core.c
> @@ -339,21 +339,6 @@ phy_lookup_setting(int speed, int duplex, const unsigned long *mask, bool exact)
> }
> EXPORT_SYMBOL_GPL(phy_lookup_setting);
>
> -size_t phy_speeds(unsigned int *speeds, size_t size,
> - unsigned long *mask)
> -{
> - size_t count;
> - int i;
> -
> - for (i = 0, count = 0; i < ARRAY_SIZE(settings) && count < size; i++)
> - if (settings[i].bit < __ETHTOOL_LINK_MODE_MASK_NBITS &&
> - test_bit(settings[i].bit, mask) &&
> - (count == 0 || speeds[count - 1] != settings[i].speed))
> - speeds[count++] = settings[i].speed;
> -
> - return count;
> -}
> -
> static void __set_linkmode_max_speed(u32 max_speed, unsigned long *addr)
> {
> const struct phy_setting *p;
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 16ffc00b419c..3128df03feda 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -37,6 +37,7 @@
> #include <net/sock.h>
>
> #include "phylib-internal.h"
> +#include "phy-caps.h"
>
> #define PHY_STATE_TIME HZ
>
> @@ -245,7 +246,7 @@ unsigned int phy_supported_speeds(struct phy_device *phy,
> unsigned int *speeds,
> unsigned int size)
> {
> - return phy_speeds(speeds, size, phy->supported);
> + return phy_caps_speeds(speeds, size, phy->supported);
> }
>
> /**
> diff --git a/drivers/net/phy/phy_caps.c b/drivers/net/phy/phy_caps.c
> index 367ca7110ddc..e5c716365b36 100644
> --- a/drivers/net/phy/phy_caps.c
> +++ b/drivers/net/phy/phy_caps.c
> @@ -76,3 +76,30 @@ void phy_caps_init(void)
> __set_bit(i, link_caps[capa].linkmodes);
> }
> }
> +
> +/**
> + * phy_caps_speeds() - Fill an array of supported SPEED_* values for given modes
> + * @speeds: Output array to store the speeds list into
> + * @size: Size of the output array
> + * @linkmodes: Linkmodes to get the speeds from
> + *
> + * Fills the speeds array with all possible speeds that can be achieved with
> + * the specified linkmodes.
> + *
> + * Returns: The number of speeds filled into the array. If the input array isn't
> + * big enough to store all speeds, fill it as much as possible.
> + */
> +size_t phy_caps_speeds(unsigned int *speeds, size_t size,
> + unsigned long *linkmodes)
> +{
> + size_t count;
> + int capa;
> +
> + for (capa = 0, count = 0; capa < __LINK_CAPA_MAX && count < size; capa++) {
> + if (linkmode_intersects(link_caps[capa].linkmodes, linkmodes) &&
> + (count == 0 || speeds[count - 1] != link_caps[capa].speed))
> + speeds[count++] = link_caps[capa].speed;
> + }
Having looked at several of these patches, there's a common pattern
emerging, which is we're walking over link_caps in either ascending
speed order or descending speed order. So I wonder whether it would
make sense to have:
#define for_each_link_caps_asc_speed(cap) \
for (cap = link_caps; cap < &link_caps[__LINK_CAPA_MAX]; cap++)
#define for_each_link_caps_desc_speed(cap) \
for (cap = &link_caps[__LINK_CAPA_MAX - 1]; cap >= link_caps; cap--)
for where iterating over in speed order is important. E.g. this would
make the above:
struct link_capabilities *lcap;
for_each_link_caps_asc_speed(lcap)
if (linkmode_intersects(lcap->linkmodes, linkmodes) &&
(count == 0 || speeds[count - 1] != lcap->speed)) {
speeds[count++] = lcap->speed;
if (count >= size)
break;
}
which helps to make it explicit that speeds[] is in ascending value
order.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
More information about the linux-arm-kernel
mailing list