[PATCH 09/11] ARM: dts: stm32: phycore-stm32mp15: Disable optional SoM peripherals

[Christophe Parant]

Following peripherals are optional on phyCORE-STM32MP15x following
PHYTEC standard SoM variants: external RTC, EEPROM, SPI NOR.
Also NAND (fmc) can be populated instead of eMMC (sdmmc2).

So disable those peripherals on SoM dtsi file and enable them on board
dts file.
Additionally, enable by default the "DTS" SoC IP on common SoM dtsi file
as it is not an optional IP in STM32MP15x SoC.

Signed-off-by: Christophe Parant <c.parant at phytec.fr>
---
 arch/arm/boot/dts/st/stm32mp157c-phyboard-sargas-rdk.dts | 8 --------
 arch/arm/boot/dts/st/stm32mp15xx-phycore-som.dtsi        | 9 ++++++++-
 2 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32mp157c-phyboard-sargas-rdk.dts b/arch/arm/boot/dts/st/stm32mp157c-phyboard-sargas-rdk.dts
index 462c89e68e2c..c9870f94ac1f 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-phyboard-sargas-rdk.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-phyboard-sargas-rdk.dts
@@ -22,14 +22,6 @@ &cryp1 {
 	status = "okay";
 };
 
-&dts {
-	status = "okay";
-};
-
-&fmc {
-	status = "disabled";
-};
-
 &gpu {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-phycore-som.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-phycore-som.dtsi
index ce859b94ae26..3f60f184978c 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-phycore-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-phycore-som.dtsi
@@ -265,11 +265,13 @@ i2c4_eeprom: eeprom at 50 {
 		compatible = "microchip,24c32",
 			     "atmel,24c32";
 		reg = <0x50>;
+		status = "disabled";
 	};
 
 	i2c4_rtc: rtc at 52 {
 		compatible = "microcrystal,rv3028";
 		reg = <0x52>;
+		status = "disabled";
 	};
 };
 
@@ -307,7 +309,7 @@ &qspi_bk1_sleep_pins_a
 		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>,
 	      <0x70000000 0x1000000>;
-	status = "okay";
+	status = "disabled";
 
 	flash0: flash at 0 {
 		compatible = "winbond,w25q128", "jedec,spi-nor";
@@ -328,6 +330,10 @@ &rtc {
 	status = "okay";
 };
 
+&dts {
+	status = "okay";
+};
+
 &sdmmc2 {
 	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_e>;
@@ -341,4 +347,5 @@ &sdmmc2 {
 	vmmc-supply = <&v3v3>;
 	vqmmc-supply = <&v3v3>;
 	mmc-ddr-3_3v;
+	status = "disabled";
 };
-- 
2.34.1