[PATCH net-next 10/11] net: stmmac: meson: switch to use set_clk_tx_rate() hook

[Russell King (Oracle)]

Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
index b115b7873cef..07c504d07604 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
@@ -22,9 +22,10 @@ struct meson_dwmac {
 	void __iomem	*reg;
 };
 
-static void meson6_dwmac_fix_mac_speed(void *priv, int speed, unsigned int mode)
+static int meson6_dwmac_set_clk_tx_rate(void *bsp_priv, struct clk *clk_tx_i,
+					phy_interface_t interface, int speed)
 {
-	struct meson_dwmac *dwmac = priv;
+	struct meson_dwmac *dwmac = bsp_priv;
 	unsigned int val;
 
 	val = readl(dwmac->reg);
@@ -39,6 +40,8 @@ static void meson6_dwmac_fix_mac_speed(void *priv, int speed, unsigned int mode)
 	}
 
 	writel(val, dwmac->reg);
+
+	return 0;
 }
 
 static int meson6_dwmac_probe(struct platform_device *pdev)
@@ -65,7 +68,7 @@ static int meson6_dwmac_probe(struct platform_device *pdev)
 		return PTR_ERR(dwmac->reg);
 
 	plat_dat->bsp_priv = dwmac;
-	plat_dat->fix_mac_speed = meson6_dwmac_fix_mac_speed;
+	plat_dat->set_clk_tx_rate = meson6_dwmac_set_clk_tx_rate;
 
 	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 }
-- 
2.30.2