[PATCH 3/3] arm64: dts: imx8mm: fix micfil dmas settings

[Marco Felsch]

The third dma cell is used for priority information not to encode
something else. The NXP downstream kernel use the third cell to encode
more information:

 - Bit31: sw_done feature enable/disable
 - Bit15~Bit8: selector
 - Bit7~Bit0: priority level

but this was never mainlined. Therefore drop the further information and
just specify the priority which is 0.

FTR: The sw_done feature was mainlined without making use of the
devicetree.

Fixes: 3bd0788c43d9 ("arm64: dts: imx8mm: Add support for micfil")
Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 4de3bf22902b..88e6a75e6c86 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -397,7 +397,7 @@ micfil: audio-controller at 30080000 {
 						 <&clk IMX8MM_CLK_EXT3>;
 					clock-names = "ipg_clk", "ipg_clk_app",
 						      "pll8k", "pll11k", "clkext3";
-					dmas = <&sdma2 24 25 0x80000000>;
+					dmas = <&sdma2 24 25 0>;
 					dma-names = "rx";
 					#sound-dai-cells = <0>;
 					status = "disabled";
-- 
2.39.5