[PATCH net-next v3 1/4] stmmac: loongson: Pass correct arg to PCI function

[Yanteng Si]

在 2/24/25 9:53 PM, Philipp Stanner 写道:
> pcim_iomap_regions() should receive the driver's name as its third
> parameter, not the PCI device's name.
>
> Define the driver name with a macro and use it at the appropriate
> places, including pcim_iomap_regions().
>
> Cc: stable at vger.kernel.org # v5.14+
> Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
> Signed-off-by: Philipp Stanner <phasta at kernel.org>

Reviewed-by: Yanteng Si <si.yanteng at linux.dev>


Thanks,

Yanteng

> ---
>   drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> index bfe6e2d631bd..73a6715a93e6 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> @@ -11,6 +11,8 @@
>   #include "dwmac_dma.h"
>   #include "dwmac1000.h"
>   
> +#define DRIVER_NAME "dwmac-loongson-pci"
> +
>   /* Normal Loongson Tx Summary */
>   #define DMA_INTR_ENA_NIE_TX_LOONGSON	0x00040000
>   /* Normal Loongson Rx Summary */
> @@ -555,7 +557,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
>   	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
>   		if (pci_resource_len(pdev, i) == 0)
>   			continue;
> -		ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
> +		ret = pcim_iomap_regions(pdev, BIT(0), DRIVER_NAME);
>   		if (ret)
>   			goto err_disable_device;
>   		break;
> @@ -673,7 +675,7 @@ static const struct pci_device_id loongson_dwmac_id_table[] = {
>   MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
>   
>   static struct pci_driver loongson_dwmac_driver = {
> -	.name = "dwmac-loongson-pci",
> +	.name = DRIVER_NAME,
>   	.id_table = loongson_dwmac_id_table,
>   	.probe = loongson_dwmac_probe,
>   	.remove = loongson_dwmac_remove,