[PATCH net-next v3 4/4] stmmac: Replace deprecated PCI functions

Philipp Stanner pstanner at redhat.com
Mon Feb 24 23:16:18 PST 2025


On Mon, 2025-02-24 at 14:53 +0100, Philipp Stanner wrote:
> From: Philipp Stanner <pstanner at redhat.com>
> 
> The PCI functions
>   - pcim_iomap_regions() and
>   - pcim_iomap_table()
> have been deprecated.
> 
> Replace them with their successor function, pcim_iomap_region().
> 
> Make variable declaration order at closeby places comply with reverse
> christmas tree order.
> 
> Signed-off-by: Philipp Stanner <pstanner at redhat.com>
> ---
>  .../net/ethernet/stmicro/stmmac/dwmac-loongson.c   | 11 ++++-------
>  drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c   | 14 ++++++------
> --
>  2 files changed, 10 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> index f3ea6016be68..25ef7b9c5dce 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> @@ -521,10 +521,10 @@ static int loongson_dwmac_acpi_config(struct
> pci_dev *pdev,
>  static int loongson_dwmac_probe(struct pci_dev *pdev, const struct
> pci_device_id *id)
>  {
>  	struct plat_stmmacenet_data *plat;
> +	struct stmmac_resources res = {};
>  	struct stmmac_pci_info *info;
> -	struct stmmac_resources res;
>  	struct loongson_data *ld;
> -	int ret, i;
> +	int ret;
>  
>  	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
>  	if (!plat)
> @@ -554,13 +554,11 @@ static int loongson_dwmac_probe(struct pci_dev
> *pdev, const struct pci_device_id
>  	pci_set_master(pdev);
>  
>  	/* Get the base address of device */
> -	ret = pcim_iomap_regions(pdev, BIT(0), DRIVER_NAME);
> +	res.addr = pcim_iomap_region(pdev, 0, DRIVER_NAME);
> +	ret = PTR_ERR_OR_ZERO(res.addr);
>  	if (ret)
>  		goto err_disable_device;
>  
> -	memset(&res, 0, sizeof(res));
> -	res.addr = pcim_iomap_table(pdev)[0];
> -
>  	plat->bsp_priv = ld;
>  	plat->setup = loongson_dwmac_setup;
>  	ld->dev = &pdev->dev;
> @@ -603,7 +601,6 @@ static void loongson_dwmac_remove(struct pci_dev
> *pdev)
>  	struct net_device *ndev = dev_get_drvdata(&pdev->dev);
>  	struct stmmac_priv *priv = netdev_priv(ndev);
>  	struct loongson_data *ld;
> -	int i;

Just saw that this is a left-over that actually should be in patch 3.
Will fix.


P.

>  
>  	ld = priv->plat->bsp_priv;
>  	stmmac_dvr_remove(&pdev->dev);
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
> index 91ff6c15f977..37fc7f55a7e4 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
> @@ -155,9 +155,9 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
>  {
>  	struct stmmac_pci_info *info = (struct stmmac_pci_info *)id-
> >driver_data;
>  	struct plat_stmmacenet_data *plat;
> -	struct stmmac_resources res;
> -	int i;
> +	struct stmmac_resources res = {};
>  	int ret;
> +	int i;
>  
>  	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
>  	if (!plat)
> @@ -188,13 +188,13 @@ static int stmmac_pci_probe(struct pci_dev
> *pdev,
>  		return ret;
>  	}
>  
> -	/* Get the base address of device */
> +	/* The first BAR > 0 is the base IO addr of our device. */
>  	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
>  		if (pci_resource_len(pdev, i) == 0)
>  			continue;
> -		ret = pcim_iomap_regions(pdev, BIT(i),
> pci_name(pdev));
> -		if (ret)
> -			return ret;
> +		res.addr = pcim_iomap_region(pdev, i,
> STMMAC_RESOURCE_NAME);
> +		if (IS_ERR(res.addr))
> +			return PTR_ERR(res.addr);
>  		break;
>  	}
>  
> @@ -204,8 +204,6 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
>  	if (ret)
>  		return ret;
>  
> -	memset(&res, 0, sizeof(res));
> -	res.addr = pcim_iomap_table(pdev)[i];
>  	res.wol_irq = pdev->irq;
>  	res.irq = pdev->irq;
>  




More information about the linux-arm-kernel mailing list