[PATCH 1/1] arm64: dts: im8mq: move dwc3 usb port under ports
Frank Li
Frank.Li at nxp.com
Mon Feb 24 11:33:07 PST 2025
Move port at 0 and port at 1 under ports to fix below DTB_CHECK warnings.
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: usb at 38100000: port at 0:reg:0:0: 0 is less than the minimum of 1
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: usb at 38100000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'dr_mode', 'phy-names', 'phys', 'port at 0', 'port at 1', 'snps,parkmode-disable-ss-quirk' were unexpected)
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
.../dts/freescale/imx8mq-librem5-devkit.dts | 25 +++++++++++--------
.../boot/dts/freescale/imx8mq-librem5.dtsi | 25 +++++++++++--------
2 files changed, 28 insertions(+), 22 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 9d8e7231b7c63..d9f203c795197 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -979,24 +979,27 @@ &usb3_phy1 {
};
&usb_dwc3_0 {
- #address-cells = <1>;
- #size-cells = <0>;
dr_mode = "otg";
status = "okay";
- port at 0 {
- reg = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- typec_hs: endpoint {
- remote-endpoint = <&usb_con_hs>;
+ port at 0 {
+ reg = <0>;
+
+ typec_hs: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
};
- };
- port at 1 {
- reg = <1>;
+ port at 1 {
+ reg = <1>;
- typec_ss: endpoint {
- remote-endpoint = <&usb_con_ss>;
+ typec_ss: endpoint {
+ remote-endpoint = <&usb_con_ss>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index c19ffa8e8a79a..9e0e2d7271efb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1321,25 +1321,28 @@ &usb3_phy1 {
};
&usb_dwc3_0 {
- #address-cells = <1>;
- #size-cells = <0>;
dr_mode = "otg";
usb-role-switch;
status = "okay";
- port at 0 {
- reg = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- typec_hs: endpoint {
- remote-endpoint = <&usb_con_hs>;
+ port at 0 {
+ reg = <0>;
+
+ typec_hs: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
};
- };
- port at 1 {
- reg = <1>;
+ port at 1 {
+ reg = <1>;
- typec_ss: endpoint {
- remote-endpoint = <&usb_con_ss>;
+ typec_ss: endpoint {
+ remote-endpoint = <&usb_con_ss>;
+ };
};
};
};
--
2.34.1
More information about the linux-arm-kernel
mailing list