[PATCH v2 2/6] dt-bindings: soc: imx93-media-blk-ctrl: Add LDB subnode into schema and example

[Alexander Stein]

Document the LDB bridge subnode and add the subnode into the example.
For the subnode to work, the block control must scan its subnodes and
bind drivers to them, do not misuse either simple-bus or simple-mfd
here.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 .../soc/imx/fsl,imx93-media-blk-ctrl.yaml     | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
index b3554e7f9e76d..d914dea6ecbb5 100644
--- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
@@ -24,6 +24,14 @@ properties:
   reg:
     maxItems: 1
 
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
   '#power-domain-cells':
     const: 1
 
@@ -46,9 +54,20 @@ properties:
       - const: csi
       - const: dsi
 
+  bridge at 20:
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: fsl,imx93-ldb
+
 required:
   - compatible
   - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
   - power-domains
   - clocks
   - clock-names
@@ -77,4 +96,36 @@ examples:
                clock-names = "apb", "axi", "nic", "disp", "cam",
                              "pxp", "lcdif", "isi", "csi", "dsi";
       #power-domain-cells = <1>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      bridge at 20 {
+          compatible = "fsl,imx93-ldb";
+          reg = <0x20 0x4>, <0x24 0x4>;
+          reg-names = "ldb", "lvds";
+          clocks = <&clk IMX93_CLK_LVDS_GATE>;
+          clock-names = "ldb";
+
+          ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port at 0 {
+                  reg = <0>;
+
+                  ldb_from_lcdif2: endpoint {
+                      remote-endpoint = <&lcdif2_to_ldb>;
+                  };
+              };
+
+              port at 1 {
+                  reg = <1>;
+
+                  ldb_lvds: endpoint {
+                      remote-endpoint = <&ldb_to_panel>;
+                  };
+              };
+          };
+        };
     };
-- 
2.43.0